User's Manual

■DCS
DCS is set with menu 11 RX DCS and menu 13 TX DCS.
For a complete list of available DCS codes, see Appendix E, “DCS Codes”.
Procedure 3.5.1 DCS setup how-to
1. Press the [MENU] key to enter the menu.
2. Enter [1][1] on the numeric keypad to get to receiver DCS.
3. Press [MENU] to select.
4. Enter desired DCS code on the numeric keypad.
5. Press [MENU] to confirm and save.
6. Enter [UP] on the numeric keypad to go to transmitter DCS.
7. Press [MENU] to select.
8. Enter desired DCS code on the numeric keypad. Make sure it's the same code as that you entered for receiver DCS.
9. Press [MENU] to confirm and save.
10. Press [EXIT] to exit the menu system.