User's Manual

2.4 Frequency (VFO) mode
In Frequency (VFO) mode you can navigate up and down the band by using the [UP] and [DOWN] keys. Each
press will increment or decrement your frequency according to the frequency step you've set your transceiver
to.
You can also input frequencies directly on your numeric keypad with kilohertz accuracy.
The following example assumes the use of a 12.5 kHz frequency step.
Example 2.4.1. Entering the frequency 462.6125 MHz on display A
1. Use the [V/M] key to switch to Frequency (VFO) mode.
2. Press [A/B] until the icon appears next to the upper display.
3. Enter [4][6][2][6][1][2][5] on the numeric keypad.