User's Manual

Chapter 2. Basic Operations
2.1 Power and volume
Before we turn the power on, make sure you have attached the battery and antenna.
■Turning the unit on
To turn the unit on, simply rotate the volume/power knob clockwise until you hear a "click". If your radio
powers on correctly there should be an audible double beep after about one second and the display will show
a message or flash the LCD depending on settings for about one second. Then it will display a frequency or
channel. If the Voice prompt is enabled, the voice will announce "frequency mode" or "channel mode".
Figure 2.1.1.Frequency mode Figure 2.1.2.Channel mode