Users Manual Part 1

29 US-EN
Reason Display Signal tone Solution
Left wheel
18
malfunction
E11
Beeps: once
Check left wheel
18
Right wheel
18
malfunction
E12
Beeps: once
Check right wheel
18
Left brush
20
malfunction
E13
Beeps: once
Check left brush
20
Right brush
20
malfunction
E14
Beeps: once
Check right brush
20
Combo floor brush
19
malfunction
E15
Beeps: once
Check combo floor brush
19
The robot vacuum cleaner
is not on the floor.
E21
Beeps: two Move the robot vacuum cleaner
to a clear area and restart.
Cliff sensor
21
malfunction
E22
Beeps: two
Check cliff sensor
21
Anti-collision sensor
23
malfunction
E23
Beeps: two
Check anti-collision sensor
23
Robot vacuum cleaner stuck.
E31
Beeps: three Move the robot vacuum cleaner
to a clear area and restart.
Fan malfunction
E32
Beeps: three Restart the robot vacuum cleaner.
Please contact customer service
if you are unable to resolve the
problem.
Battery malfunction
E41
Beeps: three Replace battery
Anti-collision sensor module
malfunction
E42
Beeps: four Restart the robot vacuum cleaner.
Please contact customer service
if you are unable to resolve the
problem.
Gyro navigation module
malfunction
E43
Beeps: five Restart the robot vacuum cleaner.
Please contact customer service
if you are unable to resolve the
problem.
Battery low Use the remote control to return
the robot vacuum cleaner to the
charging dock. If the robot vac uum
cleaner is in standby, make sure
it is charged so it will always have
enough power to clean.
HEPA filter
6
clogged Clean HEPA filter
6
.
Dust bin
17
full Empty dust bin
17
.
309029_1901__silv_Saugroboter SSRA1_content_US.indd 29 11.09.19 08:26