Roboic Vacuum cleaner SSRA1
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Description of signal words..............................................................................................Page 4 Customer service........................................................................................................................Page 4 List of pictograms used.........................................................................................................Page 4 Introduction..............................................................................................
DESCRIPTION OF SIGNAL WORDS WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE indicates information considered important, but not hazard related (e.g. messages related to property damage). CUSTOMER SERVICE Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.
Robot vacuum cleaner SSRA1 Trademark Introduction Congratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specified applications. If you lend the product to someone else, please also give all the instructions.
17 Dust bin 18 Side wheel 19 Combo floor brush 20 Side brushes 21 Cliff sensor 22 Front wheel 23 Anti-collision sensor 17 18 18 19 20 23 22 21 24 Dust bin cover 25 Main filter 26 Foam filter 24 Remote control 27 Directional buttons 28 “Start / Pause“ button 29 “Spot mode“ button 30 “Corner mode“ button 31 “Find robot vacuum cleaner“ button 32 “Max mode“ button 33 “Return mode“ button 34 “Auto mode“ button 27 25 28 29 34 30 33 31 26 32 6 US-EN 309029_1901__silv_Saugroboter SSRA1_content_US
Contents Verify that the contents are complete and that the product is in perfect condition immediately after unpacking. 1 Robot vacuum cleaner 1 Dust bin 1 Charging dock 1 Virtual wall 1 Main combo floor brush with bristles and flexible beaters 2 HEPA filters Technical 4 Side brushes 1 Remote control 1 Power adapter 1 Cleaning brush 2 AA batteries 2 AAA batteries 1 Instructions for use data Robot vacuum cleaner Model: Silvercrest SSRA1 Operating voltage: 14.
should be supervised to ensure they do not play with the product. Verify the line voltage matches that specified on the charging dock 2 . Never use the charging dock 2 if damaged. Handle the power cable 4 with care to avoid damage. Do not use the power cable 4 to move or pull the product or charging dock 2 . Do not allow the product to run over the power cable 4 and keep it away from heat sources.
in a particular installation. If this product causes harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. •C onnect the product into an outlet on a circuit different from that to which the receiver is connected.
Do not use the product on wet or damp floors. Do not use the product in temperatures over +104 °F (+40 °C) or below +50 °F (+10 °C). Remove any obstacles prior to use, for example power cables, toys and other objects. Tuck rug edges under the rug. Keep curtains and tablecloths off the floor. Try to position furniture properly. Test the product in areas with stairs. This allows you to verify the product detects the edge of the drop off. Do not stand in the way of the robot vacuum cleaner.
Store batteries in a dry place at Clean the battery contacts and room temperature. Batteries are also those of the product prior sensitive to high and low temperato battery installation. Keep the tures. Such thermal exposure may contacts clean. lead to leakage, fire, or explosion. Remove batteries from the product that will not be used for an ex Keep cells and batteries out of tended period of time (months reach of children, especially small or longer). batteries.
Use only the power cord supplied with the product. The use of other cords may result in the batteries inside the product being charged. Do not open or mutilate a battery or cell. Electrolyte from the cell is corrosive and can cause damage to the eyes or skin. The cell contents can also be hazardous if ingested. Do not drop or subject the cell or battery to strong mechanical shock. Batteries should not be disassembled, crushed, punctured, or otherwise mutilated.
You can alternatively plug the power cable 4 directly into the charging socket 10 on the product. Note: the product sometimes corrects the position on the charging dock. “Start / Pause“ button 12 blinking orange: charging green: fully charged off: Sleep mode Note: the area around the charging dock 2 must not have mirrors or other highly reflective objects within 5.9 in (15 cm) of the floor. If necessary, cover these. CAUTION! Avoid exposing the charging dock 2 to direct sunlight.
Try to position furniture properly. Test the product in areas with stairs. This allows you to verify the product detects the edge of the drop off. Do not stand in the way of the robot vacuum cleaner. Otherwise the robot vacuum cleaner will be unable to clean these areas. Find robot vacuum cleaner A beep will sound after pushing the “Find robot vacuum cleaner” button 31 on the remote control. You can then locate your robot vacuum cleaner.
In this mode the product uses parallel, overlapping lanes. It will first vacuum along the edges of the room for guidance and to measure the room. Press the “Max mode“ button 32 again to switch to the current mode with normal suction. Corner mode Press the “Auto mode“ button on the robot vacuum cleaner 13 or on the remote control 34 to start this mode. Spot mode This mode is suitable for cleaning corners and edges of a room. In “Corner mode“ the product follows a barrier (for example a wall).
Virtual wall The virtual wall 5 divides your home into separate areas to improve the cleaning efficiency of the product. For better performance, place the virtual wall 5 at a door or in front of a passage less than 9.84 ft (3 m) wide. The virtual wall 5 creates an invisible barrier which blocks the product across a length of up to 9.84 ft (3 m). Before using the virtual wall 5 you need to install 2 AA batteries (included). Open the battery cover and insert the batteries.
schedule“ 14 button to switch between minute, hour and day. After setting the schedule, press the “Start / Pause“ button 12 to save. The robot vacuum cleaner will start cleaning according to the schedule. Deleting the schedule Press the “Set schedule“ button 14 with the robot vacuum cleaner “awake“. The robot vacuum cleaner will beep and “Symbol“ and “MON“ will flash. The robot vacuum cleaner will enter “Set schedule mode“.
If you are not logged into your account, click “Add robot“ or “+“. The app swill then automatically switch to the Login menu. Enter your e-mail address and password and click “Login“. After successfully logging in, the app will automatically switch to the “Robot“ menu. Connecting 18 the product to WiFi Choose a 2.4 GHz WiFi network (the robot vacuum cleaner will not connect to 5 GHz WiFi networks) with a strong signal in your smartphone settings to connect your product.
Connecting to the app the product When the robot vacuum cleaner beeps and the WiFi indicator stays on, the robot vacuum cleaner successfully connected to the WiFi network. The first user connecting to the product becomes the administrator for the product. Only the administrator is able to share the product with other users. Other users can only disconnect from the product. After successfully connecting, the app will open a pop-up window where you can assign a name to your robot.
Cleaning via app Classic mode Auto mode Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Select “Auto mode“ so the robot will enter this mode the next time it is started via the app. 20 Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Select “Classic mode“ for the robot to enter this mode the next time it is started via the app. US-EN 309029_1901__silv_Saugroboter SSRA1_content_US.indd 20 11.09.
Max mode Spot mode Select your robot from the “Robot“ menu. Select to start this mode. Click for the robot to stop cleaning early. Note: after spot cleaning, the robot vacuum cleaner will return to Standby mode. Spot mode Spot cleaning Return mode Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Activate the “Max mode“ slider for the robot to use increased suction the next time it is started via the app.
Corner mode Select your robot from the “Robot“ menu. Select to start this mode. Click for the robot to stop cleaning early. Scheduling Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Click the “Scheduling“ menu. Select the desired time and days to clean. Click “Save“ to confirm. Click “Add schedule“ to add another schedule. 22 US-EN 309029_1901__silv_Saugroboter SSRA1_content_US.indd 22 11.09.
Click “Activate all“ to activate and disable all vacuuming schedules. Cleaning Product maintenance records Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Click “Cleaning records“. Check the cleaning history. Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Click “Spare-parts condition“. From this menu you can check the life of the side brushes, main brush and filter.
Hold the button for 2 seconds to reset the life of the replaced part. Click “Confirm“ to reset. Renaming the robot vacuum cleaner Settings Search robot Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Click “Search robot“ and the robot will beep for 10 seconds. Select your vacuum from the “Robot“ menu. Click to switch to the “Settings“ menu. Click “Robot Name“ to rename the robot vacuum cleaner. Click “Confirm“.
Resetting the product Sharing the robot vacuum cleaner with other users This option is only available to the administrator of the robot vacuum cleaner. This process will erase all data including cleaning records, the life of parts, etc. It will also erase all connections between users and the robot vacuum cleaner. The WiFi and WiFi connection settings for connecting users will also be erased. After resetting the product, the first user to connect to the robot vacuum cleaner becomes the administrator.
This option is only available to the administrator of the robot vacuum cleaner. In the “Profile“ menu, click “Share robot“. Select your robot. The app will then show the QR code and the user can scan the QR code to be able to control the robot vacuum cleaner. The other user will now need to open the “Profile“ menu and click “Scan QR-Code“. Use a different cell phone to scan in the code and be able to control the robot vacuum cleaner.
Action Command Action Command Alexa, tell Silverrobot {robot_name} vacuum in {vacuum mode} Return to charging dock Alexa, tell Silverrobot {robot_name} go home Start vacuum modes, works for Auto, Classic, Corner and Alexa, tell Silverrobot Spot mode vacuum in {vacuum mode} Alexa, tell Silverrobot go to charging dock Alexa, tell Silverrobot {robot_name} go back to charging dock Alexa, tell Silverrobot start in {vacuum mode} Find robot Alexa, tell Silverrobot I lost {robot_name} Turning on Max mode
Cleaning and storage Set the power button 9 to position “O“ before cleaning the product. Unplug the power cable 4 from the outlet before cleaning the product. Do not rinse the product directly with water. Do not wipe the product with a soaking cloth. Disconnect the power supply if the product will not be used for an extended period.
Reason Display Signal tone Solution Left wheel 18 malfunction E11 Beeps: once Check left wheel 18 Right wheel 18 malfunction E12 Beeps: once Check right wheel 18 Left brush 20 malfunction E13 Beeps: once Check left brush 20 Right brush 20 malfunction E14 Beeps: once Check right brush 20 Combo floor brush 19 malfunction E15 Beeps: once Check combo floor brush 19 The robot vacuum cleaner is not on the floor. E21 Beeps: two Move the robot vacuum cleaner to a clear area and restart.
Problem Reason Solution The robot vacuum cleaner does not charge. The robot vacuum cleaner is not making Make sure there is good contact good contact with the charging contacts between the robot vacuum cleaner 3 on the charging dock 2 . and the charging contacts 3 on the charging dock 2 . The charging dock 2 is turned off and We recommend continuous the robot vacuum cleaner is turned on, charging when the robot vacuum cleaner is not in use to ensure it draining the battery.
Disposal Dispose of the packaging through your local recycling facilities and in compliance with all federal, state and local regulations. b a P lease note the package markings regarding waste separation, indicated by abbreviations (a) and numbers (b), meaning: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials. ontact your local waste management C authority for additional information on how to dispose of the used product.
How does state law relate to this warranty? This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All implied warranties are limited by the duration and terms of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 32 US-EN 309029_1901__silv_Saugroboter SSRA1_content_US.indd 32 11.09.
Descripción de las palabras de advertencia.................................................. Página 34 Servicio al cliente................................................................................................................... Página 34 Lista de pictogramas utilizados................................................................................ Página 34 Introducción...............................................................................................................................
DESCRIPCIÓN DE LAS PALABRAS DE ADVERTENCIA ADVERTENCIA indica una situación peligrosa, que puede provocar la muerte o lesiones graves si no se evita. PRECAUCIÓN indica una situación peligrosa, que puede provocar lesiones leves o moderadas si no se evita. AVISO indica información que se considera importante, pero que no implica un peligro (p. ej. mensajes relacionados con daños materiales).
Uso previsto Descripción Este producto está diseñado para aspirar suciedad suelta y seca, como polvo, pelusa o migajas sobre pisos lisos y alfombras de pelos cortos. Use el producto solo en interiores. Este producto está diseñado sólo para uso privado y no comercial. Use el producto solo para su uso previsto. Se prohíbe cualquier otro uso distinto al que se ha mencionado o cualquier modificación al producto, ya que puede provocar lesiones o daños.
17 Bote de basura 18 Rueda lateral 19 Cepillo combinado para piso 20 Cepillos laterales 22 Rueda frontal 21 Sensor de precipicio 23 Sensor antichoque 17 18 18 19 20 23 22 21 24 Tapa del bote de basura 25 Filtro principal 26 Filtro de espuma 24 Control remoto 27 Botones direccionales 28 Botón de “inicio / pausa” 29 Botón de “modo puntual” 30 Botón de “modo de esquinas” 31 Botón “encontrar robot aspirador” 32 Botón de “modo max” 33 botón de “modo de retorno” 34 Botón de “modo automático” 27 25 28 2
Contenido Pared virtual Batería: 2 x 1.5 V AA (incluida) Inmediatamente después de desempacar, verifique que el contenido esté completo y que el producto esté en perfecto estado.
las baterías. Los niños o las mascotas podrías tragarlas. En caso de ser tragadas, busque inmediatamente atención médica. Este producto no debe ser usado por personas (incluso niños) con capacidades físicas, sensoriales o mentales reducidas o con falta de experiencia y conocimiento, a menos que sean supervisadas o instruidas sobre el uso seguro del producto por una persona responsable de su seguridad. Supervise siempre a los niños para asegurarse de que no jueguen con el producto.
autorización al usuario para operar el producto. Nota: este producto ha sido probado y cumple con los límites para un dispositivo digital clase B, de acuerdo con el apartado 15 de las normas de la FCC. Estos límites están diseñados para proveer protección razonable contra interferencias perjudiciales en una instalación residencial.
- ingreso de agua, - uso exterior. Mande reparar el producto con el fabricante con su departamento de servicio al cliente. Mantenga el cabello, las prendas y los dedos alejados de las aberturas y las partes operativas del producto. Limpie con frecuencia los sensores de precipicio. Si los sensores de piso están sucios, el producto puede llegar a caer de escaleras o descansos. Cuando use el producto, informe a los demás en la habitación para que nadie pise o tropiece con el producto.
