Product Brochure

Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011 V. 2011- 0 8
Kryton International Inc.Kryton International Inc.
6
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel [phone] | fax [phone] | toll free 1.800.267.8280 | web kryton.com
TECHNICAL DATA SHEET
Concrete Waterproong Surface-Applied 4 of 4
POTABLE WATER CONTAINMENT
NSF/ANSI Standard 61: Drinking Water System Components – Health Effects
Krystol T1 & T2 have been tested extensively and certied for concrete drinking water containment by NSF International.
APPLICATION
Read Application Instruction 2.11 — Waterproong with Surface-Application (Brush Method) or 2.12 —
Waterproong with Surface-Application (Spray Method) before using this product. Application should not be
made when the surface temperature is below 5ºC (41ºF). Mix Krystol T1 to a coating consistency (3 parts powder to 1 part
clean water). With a concrete brush, use an aggressive circular motion to coat the concrete with the Krystol T1 mix at a
coverage of 0.8 kg/m
2
(1.5 lb./sq. yd.) per coat. To ensure complete coverage with no missed or thin spots, we recommend
that you always apply two coats. While it is permissible to use Krystol T1 for both coats, using Krystol T2 for the second coat
will give a harder, more durable nish and at a much lower cost. The second coat can be applied as soon as the Krystol T1
has set hard (from 6 to 24 hours depending on conditions). Wet cure for at least 3 days, protecting from frost, rain and trafc
for at least 24 hours.
For some applications, a single coating of Krystol T1 is sufcient at a coverage rate of 1.2 kg/m
2
(2.25 lb./sq. yd.)—Contact
your Kryton representative for details.
As part of the Krystol Crack Repair System, refer to Application Instruction 5.11 — Waterproong Cracks,
Holes and Joints.
LIMITATIONS
Krystol T1 & T2 is an effective waterproong system for rigid concrete structures only and may not reliably seal cracks and
joints that experience constant or repeated movement. Consult a Kryton representative for project specic recommendations
before specifying Krystol in elevated structures.
Krystol T1 & T2 is not a decorative coating and will change the color of the surface that it is applied to. Consult your Kryton
representative for advice regarding applications with specic aesthetic requirements.
SAFETY
Read the Material Safety Data Sheet (MSDS) for this product. For professional use only. This product becomes extremely
caustic when mixed with water or perspiration. Avoid contact with skin or eyes. Avoid breathing dust. Wear long sleeves,
safety goggles and impervious gloves.
PACKAGING
• 5 kg (11 lb.) resealable pails
• 25 kg (55 lb.) resealable pails
SHELF LIFE
Krystol T1 & T2 have a minimum shelf life of 24 months for unopened pails, and 4 months for properly resealed pails.
WARRANTY
Kryton International Inc. warrants that its products are free from manufacturer’s defects and, when applied in accordance
with the current specication and application instructions will perform as so stated in its product literature. Because methods
and conditions of use are beyond the control of Kryton, no guarantee, expressed or implied can be given as to the results
of application. Liability of Kryton shall be limited to replacement of materials proved defective or, at its option, refund of the
purchase price of the product.