User's Guide

14
storing the control unit
storing the hydronic pad
To turn the Control Unit off, touch the
power button. The display should turn
off, but the fans may remain running
for a short bit after powering off the
Control Unit. Unplug the Control Unit
if you will not be using it for 24 hours.
Make sure to drain the Hydronic Pad by
inserting the included drain key into the
end of the Hydronic Pad’s connection
tube. Ensure the connection is lower than
the Hydronic Pad itself to let gravity aid
in drainage.
storing the chiliPAD
Sleep System
Press Drain Key
into Connection
Tube.
2. Press Drain Key
onto the Control
Unit’s connector to
drain.
1. Press the Blue
Button on connector
to release the tube.
(a few water drops
are expected.)