User's Guide

12
tips & tricks
your chiliPAD cheat sheet
• A dense blanket or comforter should be placed over your body when the chiliPAD sleep
system is in use, to provide the needed insulation to achieve your desired temperature.
• The “LO” setting is 55°F, and set to “HI” the maximum temperature is 115°F. In many cases
these temperatures are not fully achieved due to ambient air temperature, humidity in the
room, and objects or walls near the Control Unit.
• Please make sure there is at least 18” (45cm) of space on every side of the Control Unit.
Fresh flowing air is required for optimal performance and cooling of the internal electron-
ics.
• Inspect the connection tube and Hydronic Pad regularly for kinks and sharp angles that
would limit water flow, decreasing the systems’s ability to heat or cool.
• Condensation is a natural result of warm and cold temperatures meeting, this applies to
the tube and mattress as well. Adjust your room temperature or Control Unit to narrow the
difference of temperature, and reduce condensation.
rated voltage
rated frequency
temperature control
rated power
power
rated amperage
AC 90~230V
50Hz - 60Hz
55°-115°F (13°-46°C)
170W
170W
2.2 - 2.3 A
TECHNICAL PARAMETERS