User's Guide

10
PB
To pair your remote to your Control Unit:
1. Turn off the Control Unit.
2. Hold down the Power Button on the
Control Unit until the display flashes
“888”.
3. Press the Power Button on the Remote.
To switch between °F and °C, turn off
the Remote, then turn the Control Unit on
with the display panel. Press and hold the
Remote’s On/Off button for 2 seconds.
Press and hold the power
button on the Control Unit.
6. pairing your remote
5. control your bed
Press the cooler button (snowflake)
to lower the set temperature, and
you will see the numbers lowering.
Press the warmer button (flame) to
raise set temperature.
The numbers will blink 3 times to
show temperature adjustment
success.
°F
°C
Press the power button on
the remote.