instruction manual a user guide for the chiliPAD Sleep System TM
welcome to the family it’s nice to meet you The chiliPAD is our most popular sleep system. We can’t wait for you to enjoy better sleep. HOW IT WORKS The chiliPAD cooling and warming system allows adjustments to be made to your bedding surface. It cools or warms water to your set temperature and circulates it through the Hydronic Pad, achieving temperatures from 55°F (13°C) to 115°F (46°C). The silicone circulation tubes run water throughout the mattress surface to maintain your ideal sleep temperature.
CONTENTS • • • • • • • Control Unit Hydronic Pad Connector Tube Power Cord Drain Key Remote Control Manual * distilled water not included Control Unit Remote Control Hydronic Pad Connector Tube Power Cord Drain Key 3
important safety instructions don’t forget to read below Use of electrical appliances require the following precautions to reduce the risk of electric shock and injury. Read all instructions before using this system. DANGER—To reduce the risk of electric shock: • Always unplug this bed system from electrical outlet before cleaning. WARNING—To reduce the risk of burns, electric shock, or injury to persons: • Unplug from outlet before putting on or taking off parts.
WARNING: Risk of injury to persons—do not use the cooling and warming bed system to support video equipment such as televisions or computer monitors. • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces where openings may become blocked. • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the device. • Do not use outdoors.
RISKS: GROUNDING INSTRUCTIONS This product must be grounded. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Only use a grounded cord. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER! Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
meet your Control Unit the basics Water Reservoir Control Panel Familiarize yourself with the layout of the Control Unit. Air Intake Vent Connection Tube Power Cord Increase Temperature The Control Panel’s touch display is easy to use.
setup your chiliPAD six easy steps 1. place the hydronic pad Unfold your chiliPAD and place directly beneath your fitted sheet on top of your mattress. The connection tube(s) can be at the head or foot of the mattress—side up. We recommend placing the chiliPAD on top of a mattress protector to preserve the warranty of your mattress. 2. connect the tube Set your Control Unit on a flat surface with at least 18” (45cm) of breathing area around the four sides of the Control Unit.
3. power your control unit Plug the included power cord into the Control Unit, and then into a wall outlet. Use the appropriate wall outlet adapter for your region. (not included) 4. fill your control unit Before turning your Control Unit on, unscrew the top cap and fill with distilled water until full. Touch the power button to turn it on. The water pump will begin to fill the Hydronic Pad. Slowly add water until the Control Unit is full and the add water indicator light turns off. Replace cap.
5. control your bed °F °C Press the cooler button (snowflake) to lower the set temperature, and you will see the numbers lowering. Press the warmer button (flame) to raise set temperature. The numbers will blink 3 times to show temperature adjustment success. 6. pairing your remote To pair your remote to your Control Unit: 1. Turn off the Control Unit. 2. Hold down the Power Button on the Control Unit until the display flashes “888”. Press and hold the power button on the Control Unit. 3.
At what temperature should I sleep? Everyone has a unique and ideal sleep temperature, which is one of the main reasons people struggle to get deep, rejuvenating sleep on a consistent basis. Ultimately, if you are unsure where to begin, start at 65°F (18°C) and adjust up or down from there.
tips & tricks your chiliPAD cheat sheet • A dense blanket or comforter should be placed over your body when the chiliPAD sleep system is in use, to provide the needed insulation to achieve your desired temperature. • The “LO” setting is 55°F, and set to “HI” the maximum temperature is 115°F. In many cases these temperatures are not fully achieved due to ambient air temperature, humidity in the room, and objects or walls near the Control Unit.
chiliPAD care maintaining your sleep system WATER MAINTENANCE Once per month add one packet of chiliPAD System Cleaner following the instructions below. This cleaner can be purchased at chilitechnology.com 1. Using the drain key, empty the water in the Control Unit’s reservoir. 2. Refill with water and add in the chiliPAD System Cleaner. IT IS IMPORTANT THAT YOU LEAVE THE RESERVOIR CAP OFF. 3. Ensure the Control Unit is connected to the Hydronic Pad and run the Control Unit on “HI” for 1 hour. 4.
storing the chiliPAD Sleep System storing the control unit To turn the Control Unit off, touch the power button. The display should turn off, but the fans may remain running for a short bit after powering off the Control Unit. Unplug the Control Unit if you will not be using it for 24 hours. 1. Press the Blue Button on connector to release the tube. (a few water drops are expected.) 2. Press Drain Key onto the Control Unit’s connector to drain.
troubleshooting try these first! Ensure the wall outlet has power. I PUSHED THE POWER BUTTON AND NOTHING HAPPENS! Make sure the power cord is securely inserted into the Control Unit. Add water if the water drop icon appears, see instructions for proper use. Try replacing the remote batteries if trying to power on the Control Unit with remote.
information compliance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
deep sleep, delivered 17
need some help? we understand. For a copy of our 90-day Satisfaction Guarantee and 2-Year Limited Product Warranty or for product help, please visit help. chilitechnology.com or contact a customer representative at 877-235-6271 (US) or 1-704-235-6831 (Int’l). TM Kryo, Inc. 144 Talbert Pointe Dr.
