SDS
Section 8. Exposure controls/personal protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Respiratory protection
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product. When there is a risk of ignition from static electricity, wear anti-
static protective clothing. For the greatest protection from static discharges, clothing
should include anti-static overalls, boots and gloves.
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
0.85
1 [Air = 1]
13.5 kPa (101.325 mm Hg) [at 20°C]
Not available.
Not available.
Odor
pH
Not available.
Color
Evaporation rate
1.44 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: -29°C (-20.2°F) [Pensky-Martens Closed Cup]
Not available.
7
Viscosity
Kinematic (room temperature): >0.07 cm
2
/s (>7 cSt)
Kinematic (40°C (104°F)): >0.07 cm
2
/s (>7 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
Not available.
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Lower: 0.9%
Upper: 27%
Decomposition temperature
:
Not available.
Type of aerosol
:
Spray
Heat of combustion
:
0.00001279 kJ/g
Aerosol product
Section 10. Stability and reactivity
Conditions to avoid
Avoid all possible sources of ignition (spark or flame).
The product is stable.
Chemical stability
:
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
3/13/2015.
Date of previous issue
:
No previous validation.
Version
:
1
6/11