Installation & Assembly

12
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Water is leaking under the
appliance.
There's an internal leak. Check that the tank is tted
correctly. If the leak continues,
do not use the appliance,
contact an approved service
center.
The drip tray has not been
tted correctly.
Check that the drip tray is
pushed to the back of the
appliance.
The drip tray is overowing. Empty and carefully rinse the
drip tray and replace.
The cups have been lled
unequally.
The lter holder is clogged. Please refer to the paragraph
on CLEANING AND
SERVICING for servicing your
lter holder.
The pump is abnormally
hot.
There is no water in the
tank.
Fill the tank with water and
re-initiate the pump (see
paragraph: USING FOR THE
FIRST TIME). Avoid emptying
the tank completely.
The espresso leaks over
the edges of the lter.
The lter holder is not
positioned correctly.
Put the lter holder in place and
lock it (turning it from left to right
as far as it will go).
Remove excessive coffee
grounds that prevent the lter
holder to be locked.
The rim of the lter holder
is encrusted with coffee
grounds.
Remove excessive coffee
grounds and clean the grid
through which water passes
with a damp sponge.
Your espresso tastes bad. The appliance was not
rinsed correctly after
descaling.
Rinse the appliance according
to the instructions and check
the quality of the coffee.