Use and Care Manual

7
ENGLISH
starting the coffee-making process.
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
Set the clock. Check whether the clock has already been set. If the clock has not been
set, refer to the section “Setting the clock”.
Keep the Auto start button (5) pressed until the clock on the display ashes.
Repeatedly press the Hour button (6) to set the hours.
Repeatedly press the Minutes button (7) to set the minutes.
Set the coffee quantity. Refer to the section “Setting the coffee quantity”.
Set the coffee strength. Refer to the section “Setting the coffee strength”.
If you want to make coffee with ground coffee, switch off the grinding function before
using the auto start function.
Press the Auto start button (5) to save the settings. The timer indicator (C) light will
continuously glow.
To interrupt the process, press the Auto start button (5) again. The timer indicator (C) will
turn off.
CLEANING AND MAINTENANCE
To dispose of used ground coffee, remove the lter and the lter holder of the coffee
maker.
Throw the coffee grounds and lter paper in the garbage.
Do not clean the appliance if it is still hot.
Wash the carafe, the removable lter holder and the permanent lter with warm, soapy
water.
CAUTION: Do not place the carafe in the microwave.
Do not put any parts of the coffee maker into the dishwasher.
Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong
products on any part of the coffee maker.
To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge
with warm water. Wipe carefully with a dry cloth.
For difcult stains, use a cloth with white vinegar.
Do not immerse the appliance in water or under the faucet.
Cleaning the grinding compartment (Fig. 10 and 11)
When grinding coffee beans, coffee powder can clog the grinding mechanism. The grinding
compartment (19) should be cleaned at least every 2 weeks to prevent the grinding
mechanism from being clogged.
Before you proceed, we would like you to focus your attention on the following notes:
Before cleaning the grinding compartment, take the following actions:
Switch off the appliance.
Remove the plug from the wall socket.
Remove the coffee carafe from the heating plate.
Empty the coffee lter holder. Place a suitable coffee lter. Close the lter holder.
Remove the cover by pressing with a tooth pick or similar non metallic object and pulling
the cover simultaneously Fig. 10.
Clean the grinding compartment (19) using the brush (21).
Replace the cover.
Do not clean the machine if it is still hot.
IFU_NC00140324-03_KRUPS GRIND AND BREW COFFEE MAKER_3L.indd 7 29/06/17 16:53