Use and Care Manual
6
Switch on the appliance by pressing the Grind and Brew button (1). The cup-of-coffee
symbol (E) appears (Keep warm function).
After a few seconds, the appliance starts grinding the coffee beans and making the coffee.
To interrupt the process, press the Grind and Brew button (1).
If the process is completed, the appliance will beep and switch to keep-warm mode.
The cup-of-coffee symbol (E) starts ashing. The appliance can be switched off by
pressing the Grind and Brew button (1) or the appliance switches off automatically after
2 hours.
Making coffee with ground coffee
Before you proceed, we would like you to focus your attention on the following notes:
Only use ground coffee.
Only use paper coffee lters or the permanent lter that are suitable for the appliance.
Fill the water reservoir (15) with the required amount of water.
Do not ll the water reservoir with more water than required for making the coffee.
Press the Release button (12) to open the lter holder Fig. 6.
Place a suitable paper lter or permanent lter in the coffee lter holder (10) Fig.7a or 7b.
Put the required amount of coffee in the coffee lter.
Close the lter holder (10) until the Release button (12) clicks into place.
Place the glass carafe (17) on the heating plate (18).
Switch on the appliance by pressing the Grind off button (2). The cup-of-coffee symbol(E)
appears.
To interrupt the process, press the Grind off button (2).
If the process is completed, the appliance will beep and switch to keep-warm mode.
The cup-of-coffee symbol (E) starts ashing. The appliance can be switched off by
pressing the Grind off button (2) or the appliance switches off automatically after 2 hours.
Setting the coffee quantity
The coffee quantity selector (3) is used for setting the required coffee quantity. The coffee
quantity selector (3) can be set to 2, 4, 6, 8 or 10 cups.
Setting the coffee strength (B)
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG).
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
Repeatedly press the coffee strength selector (7) to set the coffee strength. The coffee
strength (B) is shown on the display (8).
Setting the ground coffee fineness (Fig. 8)
The ground coffee neness selector (9) is used for setting the required neness of the
ground coffee when using coffee beans. The ground coffee neness selector (9) can be set
to different positions from ne ground coffee to coarse ground coffee.
Turn the ground coffee neness selector (9) to the required position to set the neness of
the ground coffee.
Auto start function
The appliance has an auto start function which makes it possible to program the time for
IFU_NC00140324-03_KRUPS GRIND AND BREW COFFEE MAKER_3L.indd 6 29/06/17 16:53