Installation Guide
4
www.krugg.us
ELECTRICAL WIRE INFORMATION
The LED Driver inside the enclosed Sol mirror has already converted the electric to 110 volts.
You can connect the wires that are coming out of the center of the back of the mirror directly
to your electrical connecon box. The lead contains 3 wires:
• Copper Wire (Green) = GROUND wire.... connect to ground wire in your box, or to the box
as a ground.
• White (or can be Brown) = NEUTRAL wire.... connect to the White neutral wire in your box.
• Black (or can be Blue) = HOT wire.... connect to the Black hot wire in your box.
The Sol wires get connected to your 110 Volt electric box that you should have placed in
the wall, behind where your Sol Mirror will be mounted. It doesn’t have to be exactly in the
center as the lead wire gives you exibility in the placement. However we suggest you place it
somewhere towards the center.
INSTALLATION GUIDE
12
y
x
x
0.6mm
y
wall
tiles
2-3mm
H
3
6
B
A
B
A
4 5