www.krugg.
www.krugg.us WARNING: • All fittings must be installed in • • • accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician. Switch off the electrical supply at the main circuit board BEFORE installation and maintenance. Suitable for Bathroom Zones 2, 3 and non bathroom/dry areas. See diagram below. • • • • • NOT suitable for above baths or Zone 1 nor for installation in Saunas, Steam Rooms or Shower Cubicles. DO NOT connect to a plug and socket outlet.
www.krugg.us IMPORTANT—BEFORE YOU BEGIN • • • • • Inspect the product immediately upon receipt for transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass. If drilling holes in ceramic tiles use a piece of masking tape on the tile to stop the drill bit from slipping.
www.krugg.us ELECTRICAL WIRE INFORMATION Sol Electrical Connection The LED Driver inside the enclosed Sol mirror has already converted the electric to 110 volts. You can connect the wires that are coming out of the center of the back of the mirror directly to your electrical connection box. The lead contains 3 wires: • Copper Wire (Green) = GROUND wire.... connect to ground wire in your box, or to the box as a ground. • White (or can be Brown) = NEUTRAL wire....
www.kruggusa.
