MODULAR LED Mirror System Installa�on & User Guide
DANGER Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit breaker or fuse box before a�em�ng any installa�on procedure. The mirror must also be properly grounded. To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing only for it’s intended use as described in these instruc�ons. Do not use a�achments not recommended by the manufacturer. Never drop or insert any object into any opening. Do not use outdoors.
WARNING All fi�ngs must be installed in accordance with current IEE wiring regula�ons. If in doubt, consult a qualified electrician. NOT suitable for above baths or Zone 1 not for installa�on in Saunas, Steam Rooms or Shower Cubicles. Suitable for indoor use only. Switch off the electrical supply at the main circuit board BEFORE installa�on and maintenance. DO NOT fix to damp or conduc�ve surfaces. Site well away from curtains and fabrics. Suitable for Bathroom Zones 2, 3 and non bathroom/dry areas.
IMPORTANT - BEFORE YOU BEGIN Inspect the product immadiately upon receipt for transit damage or missing parts. Handle the product with care and protect against knock to all sides and edges of the glass. Make sure that you have all the tools you need to complete the job. (SEE BELOW) Ensure ther are no hidden pipes or cables in the wall before drilling. If drilling holes in ceramic �les use a piece of masking tape on the �le to stop the drill bit from slipping.
www.kruggusa.com ELECTRICAL WIRE INFORMATION The Lead Contains 3 Wires: COPPER WIRE (GREEN) = GROUND WIRE...Connect to GROUND WIRE in your box, or to the box as a ground. WHITE (or BROWN) = NEUTRAL WIRE... Connect to the WHITE NEUTRAL WIRE in your box. BLACK (or BLUE) = HOT WIRE... Connect to the BLACK HOT WIRE in your box. The Modular wires will be connected to your 120 Volt electric box. This should be placed in the wall, behind your Modular Mirror.
www.kruggusa.
www.kruggusa.
www.kruggusa.
www.kruggusa.com FRONT 1. 2. B. 3. B. 4. B. A. B. A. B. A. 10. B. A. 11. B. A. A. B. A. 9. B. 6. B. A. 8. 7. 5. B. A. A. A. BACK D. SIDE C. E. F. A B C D E F ELECTRIC CURRENT WATTAGES Mod 1836 Le� LED Mirror 18 36 8-13/20 17-7/8 1-3/8 3/16 0.28A 34W 2 Mod 1836 Right LED Mirror 18 36 8-13/20 17-7/8 1-3/8 3/16 0.28A 34W 3 Mod 2136 Le� LED Mirror 21 36 9-3/4 17-7/8 1-3/8 3/16 0.
www.kruggusa.com USE AND MAINTENANCE • The interior is constructed of mirrored glass and aluminum. Use only a damp cloth • to clean. Ammonia or vinegar-based cleaners can damage mirrors. When cleaning, spray the cloth, not the mirror, or surrounding surfaces. Do not use abrasive cleansers on any part of the light fixture.
