MSDS

KRUD KUTTER® Ultra Power Specialty Adhesive Remover 2/13/2009
North America 5/8
UN-Number: 1760
Proper Shipping Name: Corrosive liquid, n.o.s. (d-limonene)
Class: 8
Packaging Group: II
Emergency Response Guide Number: 154
TDG
:
Limited Quantity
Inner packaging must not exceed 1.0 Liters (0.3 Gallons). The gross mass of the package must not exceed
30 kilograms (66 pounds).
For over 30 kilograms (66 pounds):
UN-Number: 1760
Proper Shipping Name: Corrosive liquid, n.o.s. (d-limonene)
Class: 8
Packaging Group: II
IATA
:
UN-Number: 1760
Proper Shipping Name: Corrosive liquid, n.o.s. (d-limonene)
Class: 8
Packaging Group: II
Label: Corrosive
Passenger & Cargo Aircraft Packing Instructions: Y808
For Limited
Quantities of liquids of Class 8 Packing Group II:
Passenger & Cargo Aircraft Limited Quantity Maximum Quantity Package:
0.5 Liter
Single packagings are not permitted. The inner packagings must be packed in one of the following outer
packagings with sufficient cushioning/absorbent material so as to prevent movement/leakage. The
maximum quantity must not exceeded. Inner packagings: glass earthenware, plastic, metal (not
aluminum), aluminum or glass ampoule.
Outer Packaging: Glass or earthenware inner packagings and glass ampoules must be packaged with
compatible absorbent material in tightly closed metal or rigid plastic receptacles before being packaged in
outer packagings.
Outer Packaging: Boxes: Solid plastic boxes must be used.
Passenger & Cargo Aircraft Packing Instructions: 808
Passenger & Cargo Aircraft Maximum Quantity/Package:
1 Liter
Single packagings are not permitted. The inner packagings must be packed in one of the following outer
packagings with sufficient cushioning/absorbent material so as to prevent movement/leakage. The
maximum quantity must not exceeded. Inner packagings: glass earthenware, plastic, metal (not
aluminum), aluminum or glass ampoule.
Outer Packaging: Glass or earthenware inner packagings and glass ampoules must be packaged with
compatible absorbent material in tightly closed metal or rigid plastic receptacles before being packaged in
outer packagings.
Outer Packaging: Drums: Steel (1A2), aluminum (1B2), plywood (1D), fiber (1G), plastic (1H2).
Jerricans: Steel (3A2), Aluminum (3B2), Plastic (3H2);
Boxes: UN Certified Box, Steel (4A), aluminum (4B), wood (4C1,4C2), plywood (4D), reconstituted
wood (4F), fiber board (4G) and plastic (4H2).
Cargo Aircraft Only Package Instruction: 812