MSDS

KRUD KUTTER® Ultra Power Specialty Adhesive Remover 2/13/2009
North America 2/8
3 COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS-No. Weight %
water 7732-18-5 > 50
d-limonene 5989-27-5 < 25
surfactant proprietary < 10
2-butoxyethanol 111-76-2 < 5
diethylene glycol monobutyl ether 112-34-5 < 5
Components not listed are not hazardous or are below reportable limits
4 FIRST AID MEASURES
Inhalation: Move to fresh air. Treat symptomatically. Get medical attention.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If
easy to do, remove contact lenses, if worn. Get medical attention immediately.
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical attention immediately. Wash clothing
before reuse. Thoroughly clean contaminated shoes before reuse.
Ingestion: If swallowed, DO NOT induce vomiting, unless directed by medical personnel. Get medical
attention immediately.
5 FIRE-FIGHTING MEASURES
Extinguishing Media: Water spray, carbon dioxide, dry chemical or foam.
Unsuitable Extinguishing Media: Not applicable
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Unusual Fire & Explosion Hazards: None
Hazardous Combustion Products: Carbon oxides, sulfur oxides
6 ACCIDENTAL RELEASE MEASURES
Personal Precautions: Wear appropriate personal protective equipment (See Section 8).
Spill Cleanup Methods: Small Liquid Spills: Wipe up or use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Large Spillages: Absorb or cover with dry earth, sand or other non-combustible material and transfer to
containers. Flush with water spray. Prevent entry into waterways, sewer, basements or confined areas.
7 HANDLING AND STORAGE
Handling: Avoid breathing mist or vapors. Do not get in eyes, on skin or clothing. Do not taste or
swallow. Use with adequate ventilation. Wash thoroughly after handling.