MSDS

ManualsBrandsKrud Kutter ManualsPaint22 oz. Graffiti Remover

MATERIAL SAFETY DATA SHEET

Krud Kutter, Inc. Page 1 of 6

Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Directives

1. PRODUCT IDENTIFICATION

TRADE NAME (AS LABELED): KRUD KUTTER® Graffiti Remover

SYNONYMS: Not Applicable

CHEMICAL SHIPPING NAME/CLASS: NON-REGULATED MATERIAL

U.N. NUMBER: Not Applicable

MANUFACTURER'S NAME: Krud Kutter,Inc.(Formerly Supreme Chemicals of Georgia, Inc.)

ADDRESS: 1535 Oak Industrial Lane, Suite B, Cumming, GA 30041 USA

EMERGENCY PHONE: (800) 424-9300 (CHEMTREC - US)

(703) 527-3887 (Outside USA)

BUSINESS PHONE: (800) 466-7126

DATE OF PREPARATION: March 27, 2011

DATE OF REVISION: February 4, 2014

2. HAZARD IDENTIFICATION

EMERGENCY OVERVIEW: Warning!

Product Description: This product is a clear liquid with a sweet odor.

Health Hazards: May be harmful if inhaled, absorbed through skin or swallowed. May cause eye and skin irritation. Mist or

vapor may cause irritation to the respiratory tract and eyes.

Flammability Hazards: Flash point greater than 93.3°C

Reactivity Hazards: This product is not reactive.

Environmental Hazards: Release of this product is not expected to cause significant adverse effects to the aquatic

environment.

Emergency Recommendations: Emergency responders must have personal protective equipment and fire protection

appropriate for the situation to which they are responding.

EU LABELING AND CLASSIFICATION: This product meets the definition of a hazardous substance or preparation

according to EU Regulations (EC) No 1272/2008.

INDEX NUMBER:

EC# 202-859-9 Annex I – Index# 603-057-00-5

EC# 203-905-0 Annex I – Index# 603-014-00-0

GHS CLASSIFICATIONS:

Acute Toxicity Category 4

Eye Irritant Category 2

Skin Irritant Category 2

SIGNAL WORD : Warning!

HAZARD STATEMENT:

H302 Harmful if swallowed

H312 Harmful in contact with skin

H315 Causes skin irritation

H319 Causes eye irritation

H332 harmful if inhaled

PREVENTION STATEMENT :

P264 Wash hands thoroughly after handling

P271 Use in well ventilated areas

HEALTH HAZARD

FLAMMABILITY HAZARD

REACTIVITY

HAZARD

PROTECTIVE EQUIPMENT

EYES

RESPIRATORY

HANDS

BODY

(BLUE)

(RED)

For Routine Industrial Use and Handling Applications

SEE SECTION 8

HAZARDOUS MATERIAL IDENTIFICATION SYSTEM

(YELLOW)

SEE SECTION 8

Scale: 0 = Minimal 1 = Slight 2 = Moderate

3 = Serious 4 = Severe * = Chronic hazard

HEALTH

FLAMMABILITY

REACTIVITY

OTHER

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Directives 1. PRODUCT IDENTIFICATION TRADE NAME (AS LABELED): SYNONYMS: CHEMICAL SHIPPING NAME/CLASS: U.N. NUMBER: MANUFACTURER'S NAME: ADDRESS: EMERGENCY PHONE: KRUD KUTTER® Graffiti Remover Not Applicable NON-REGULATED MATERIAL Not Applicable Krud Kutter,Inc.(Formerly Supreme Chemicals of Georgia, Inc.
PAGE 2
MATERIAL SAFETY DATA SHEET P280 Wear protective gloves/protective clothing/eye protection/ face protection RESPONSE STATEMENT: P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P305 + P351 IF IN EYES : Rinse cautionously with water for several minutes HEALTH EFFECTS OR RISKS FROM EXPOSURE: ACUTE: INHALATION: May be harmful; causes irritation. Exposure irritates the respiratory system and may cause asthmatic breathing and other systemic effects. SKIN: May be harmful; May cause skin irritation.
PAGE 3
MATERIAL SAFETY DATA SHEET UNUSUAL FIRE AND EXPLOSION HAZARDS: None known Explosion Sensitivity to Mechanical Impact: No Explosion Sensitivity to Static Discharge: No SPECIAL FIRE-FIGHTING PROCEDURES: Incipient fire responders should wear eye protection. Structural firefighters must wear Self-Contained Breathing Apparatus and full protective equipment. Isolate materials not yet involved in the fire and protect personnel.
PAGE 4
MATERIAL SAFETY DATA SHEET BODY PROTECTION: Use body protection appropriate for task (e.g. lab coat, overalls). If necessary, refer to appropriate Standards of Canada, or appropriate Standards of the EU, Australian Standards, or relevant Japanese Standards. If a hazard of injury to the feet exists due to falling objects, rolling objects, where objects may pierce the soles of the feet or where employee’s feet may be exposed to electrical hazards, use foot protection, as described in U.S. OSHA 29 CFR 1910.
PAGE 5
MATERIAL SAFETY DATA SHEET 13. DISPOSAL CONSIDERATIONS PREPARING WASTES FOR DISPOSAL: Waste disposal must be in accordance with appropriate U.S. Federal, State, and local regulations, those of Canada, Australia, EU Member States and Japan. 14. TRANSPORTATION INFORMATION US DOT, IATA, IMO, ADR: U.S. DEPARTMENT OF TRANSPORTATION (DOT) SHIPPING REGULATIONS: This product is classified (per 49 CFR 172.101) by the U.S. Department of Transportation, as follows.
PAGE 6
MATERIAL SAFETY DATA SHEET EUROPEAN ECONOMIC COMMUNITY INFORMATION: EU LABELING AND CLASSIFICATION: This product meets the definition of the following hazard class as defined by the European Economic Community Guidelines. EU CLASSIFICATION: [Xn] Harmful, [Xi] Irritant EU RISK PHRASES: R20/21/22: Harmful by inhalation, in contact with skin and if swallowed; R36/38: Irritating to eyes and skin.