MSDS

ManualsBrandsKrud Kutter ManualsFloor Machine1-gal. Concrete Clean and Etch

MATERIAL SAFETY DATA SHEET

Krud Kutter, Inc. Page 1 of 6

Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Directives

1. PRODUCT IDENTIFICATION

TRADE NAME (AS LABELED): KRUD KUTTER® Concrete Clean and Etch

SYNONYMS: Not Applicable

CHEMICAL SHIPPING NAME/CLASS: LIMITED QUANTITIY (See Section 14 for Details)

U.N. NUMBER: UN 1805 (Packages over 5.0 Liters, 1.3 gallons)

MANUFACTURER'S NAME: Krud Kutter,Inc.(Formerly Supreme Chemicals of Georgia, Inc.)

ADDRESS: 1535 Oak Industrial Lane, Suite B, Cumming, GA 30041 USA

EMERGENCY PHONE: (800) 424-9300 (CHEMTREC - US)

(703) 527-3887 (Outside USA)

BUSINESS PHONE: (800) 466-7126

DATE OF PREPARATION: April 4, 2011

DATE OF REVISION: January 2, 2013

2. HAZARD IDENTIFICATION

EMERGENCY OVERVIEW: Danger!

Product Description: This product is a translucent orange liquid with a bland odor.

Health Hazards: May cause eye and skin burns and/or irritation. Mist or vapor cause irritation to the respiratory tract.

Flammability Hazards: Non-Flammable

Reactivity Hazards: This product is not reactive.

Environmental Hazards: Release of this product may cause significant adverse effects to the aquatic environment.

Emergency Recommendations: Emergency responders must have personal protective equipment and fire protection

appropriate for the situation to which they are responding.

EU LABELING AND CLASSIFICATION: This product meets the definition of a hazardous substance or preparation

according to EU Regulations (EC) No 1272/2008.

INDEX NUMBER:

EC# 231-633-2 Annex I – Index# 015-011-00-6

GHS CLASSIFICATIONS:

Skin Corrosive Category 1B

SIGNAL WORD : Danger!

HAZARD STATEMENT:

H314 Causes severe skin burns and eye damage

PREVENTION STATEMENT :

P260 Do not breath dust/fume/gas/mist/vapor/ spray

P264 Wash hands thoroughly after handling

P271 Use in well ventilated areas

P280 Wear protective gloves/protective clothing/eye protection/ face protection

HEALTH HAZARD

FLAMMABILITY HAZARD

REACTIVITY

HAZARD

PROTECTIVE EQUIPMENT

EYES

RESPIRATORY

HANDS

BODY

(BLUE)

(RED)

For Routine Industrial Use and Handling Applications

SEE SECTION 8

HAZARDOUS MATERIAL IDENTIFICATION SYSTEM

(YELLOW)

SEE SECTION 8

Scale: 0 = Minimal 1 = Slight 2 = Moderate

3 = Serious 4 = Severe * = Chronic hazard

HEALTH

FLAMMABILITY

REACTIVITY

OTHER

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Directives 1. PRODUCT IDENTIFICATION TRADE NAME (AS LABELED): SYNONYMS: CHEMICAL SHIPPING NAME/CLASS: U.N. NUMBER: MANUFACTURER'S NAME: ADDRESS: EMERGENCY PHONE: KRUD KUTTER® Concrete Clean and Etch Not Applicable LIMITED QUANTITIY (See Section 14 for Details) UN 1805 (Packages over 5.0 Liters, 1.3 gallons) Krud Kutter,Inc.
PAGE 2
MATERIAL SAFETY DATA SHEET RESPONSE STATEMENT: P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P305 + P351 IF IN EYES : Rinse cautionously with water for several minutes P333 + P313 IF skin irritation or rash occurs : Get medical advice/attention HEALTH EFFECTS OR RISKS FROM EXPOSURE: ACUTE: INHALATION: Mist or vapor causes irritation to the respiratory tract. Exposure may cause coughing, wheezing and respiratory irritation. SKIN: Causes skin irritation.
PAGE 3
MATERIAL SAFETY DATA SHEET Explosion Sensitivity to Mechanical Impact: No Explosion Sensitivity to Static Discharge: No SPECIAL FIRE-FIGHTING PROCEDURES: Incipient fire responders should wear eye protection. Structural firefighters must wear Self-Contained Breathing Apparatus and full protective equipment. Isolate materials not yet involved in the fire and protect personnel. Move containers from fire area if this can be done without risk; otherwise, cool with carefully applied water spray.
PAGE 4
MATERIAL SAFETY DATA SHEET hazard of injury to the feet exists due to falling objects, rolling objects, where objects may pierce the soles of the feet or where employee’s feet may be exposed to electrical hazards, use foot protection, as described in U.S. OSHA 29 CFR 1910.136. 9. PHYSICAL and CHEMICAL PROPERTIES VAPOR DENSITY: 3.2 EVAPORATION RATE (n-BuAc=1): <1 % VOLATILE: 1% MELTING/FREEZING POINT: <-1.
PAGE 5
MATERIAL SAFETY DATA SHEET PACKAGES OVER 5.0 LITERS (1.3 GALLONS) PROPER SHIPPING NAME: PHOSPHORIC ACID SOLUTION HAZARD CLASS NUMBER and DESCRIPTION: Class 8 Corrosive UN IDENTIFICATION NUMBER: UN 1805 PACKING GROUP: III DOT LABEL(S) REQUIRED: Class 8 Corrosive NORTH AMERICAN EMERGENCY RESPONSE GUIDEBOOK NUMBER: 154 RQ QUANTITY: NA MARINE POLLUTANT: The components of this product are designated by the Department of Transportation to be Marine Pollutants (49 CFR 172.101, Appendix B).
PAGE 6
MATERIAL SAFETY DATA SHEET EUROPEAN ECONOMIC COMMUNITY INFORMATION: EU LABELING AND CLASSIFICATION: This product meets the definition of the following hazard class as defined by the European Economic Community Guidelines. EU CLASSIFICATION: [C] Corrosive EU RISK PHRASES: R34: Causes burns; R36/37/38: Irritating to respiratory system, eyes and skin.