dx 802 spec

Model:
Project:
Item #:
Qty:
Date:
Approved By:
DX-802
8” Center Wall Mount Faucet with 8-1/2” Wide Double Bend Spout
Due to our commitment to continued product improvement, specications are subject to change without notice.
Rev. 03/2021 • No. DX-802
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • P: [phone] • [e-mail] • krowne.com
12-11/16”
8-1/2”
7-5/8”
1:3.3
A

Lester
GREA TNESS SANITARY
INDUSTRIAL CO.,
8"
13-3/16”
3-11/16”
2-3/4”
1-13/16”
30”
STANDARD FEATURES
PRODUCT COMPLIANCE
SPECIFICATIONS
Water Inlet 1/2” NPT Female
Temp. Range 40°F - 180°F
Pressure 20-120 PSI
Rough In 7/8” Round Holes on 8” Center
Flow Rate 1.8 GPM
Material Solid Brass
Finish Ultra-Polish Satin
Weight 7 lbs.
▪ ASME A112.18.1/CSA B125.1
▪ NSF-61
▪ NSF/ANSI 372
▪ Meets ANSI A117.1 (ADA)
WARNING: Plumbing connections should be made by qualified personnel who will observe all applicable plumbing, sanitary and safety codes.
California Proposition 65 Warning
DESCRIPTION
8” Center Wall Mount Faucet with 8-1/2” Wide Double Bend Spout, Ultra-Polish Satin
Finish, 1.8 GPM Female Aerator Installed
▪ 1/4 turn stainless steel high performance ceramic cartridge valves with built-in check
valves
▪ Heavy duty flanges with eccentric fittings and flange seal technology
▪ Lever handles
▪ Mounting kit included
▪ E-Z install flexible water line kit included
▪ Lifetime Warranty