Spec Sheet

Dipperwell Faucet with 0.25 GPM Flow Restrictor
Royal Series
Model:
Project:
Item #:
Qty:
Date:
Approved By:
Due to our commitment to continued product improvement, specications are subject to change without notice.
Rev. 06/2021 • No. 16-155L
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • P: [phone] • [e-mail] • krowne.com
16-155L
 Polished chrome cross handle knob
 1/2” NPS inlet with included 1/4” NPT tailpiece
 0.25 GPM Flow Restrictor installed inside shank
 Warranty: 3 years
 NSF-61 & NSF/ANSI 372
 ASME A112.18.1-2012/CSA
B125.1-12
 Massachusetts Approved
 CEC Approved
PRODUCT COMPLIANCE
STANDARD FEATURES
DESCRIPTION
SPECIFICATIONS
Water Inlet 1/2” NPS
Temp. Range 40°F - 140°F
Pressure 20-120 PSI
Rough In 7/8” Hole
Flow Rate 0.25 GPM
Material Solid Brass
Finish Polished Chrome
Weight 1 lbs.
WARNING: Plumbing connections should be made by qualified personnel who will observe all applicable plumbing, sanitary and safety codes.
California Proposition 65 Warning
 Single Hole Deck Mount Dipperwell Faucet with 0.25 GPM Flow Restrictor, Polish
Chrome Finish
1-15/16”
3-3/4”
3-5/8”
2-3/8”
1-3/8”
1/2" NPS