KROSS STUDIO WATCH WINDER USER MANUAL
TABLE OF CONTENTS Unboxing & regular care 3 Tech specs 4 Assembly 5 Starting up 6 Winding cycle launch 7 General specifications 8 Replacing the batteries 9
UNBOXING & REGULAR CARE UNBOXING Thank you for purchasing Kross Studio watch winder. As the winder weighs approximately 2kg, it is important to take extreme caution when manipulating it. Handle it with care as negligent manipulation might alter the precision of the winder. The box and the thermoforming foams have been conceived for safe transportation. In order not to alter the winder during transport, the winding motor is not assembled to its support in the packaging.
TECH SPECS KROSS STUDIO WATCH WINDER WINDING CASE FUNCTIONING General The watch winder has a system that allows the maintaining of the automatic mechanism of your watch. Model Name Kross Studio Aluminum Watch Winder Power 4 Lithium/Alkaline AA 1.5V (LR6) batteries It is equipped with an infrared sensor that detects the presence of your watch. When there is no watch inside, the device remains in standby mode to avoid battery usage. Limited Edition Rotation speed 13.
ASSEMBLY Kross Studio watch winder is equipped with two elements: the winding motor and its support, from which it can easily be disassembled in order to be stored while winding a watch. Follow the instruction below to safely assemble your watch winder: 1. Press the LED ON/OFF button (2) 2 times to reset the winding motor This button must be placed at 9 o'clock when the winding motor is in its support 2. Insert the winding motor in the support by placing the screws in front of the matching notches 3.
STARTING UP To turn on your watch winder, press the ON/OFF button (2). The white LED indicator lights up to confirm that it is turned on. The device will not turn on while the button is held down. The LED indicator flashes to indicate the battery charge level: 4 flashes: full charge 2 3 flashes: 60% charge 2 flashes: 30% charge A flash every 2 seconds means it is time to change the batteries. To replace the batteries, refer to the procedure page 9.
WINDING CYCLE LAUNCH Before following the procedure below, make sure that the winder is turned off to prevent it from rotating. To do this, press again the ON/OFF LED button (2). If the unit was turned off, it will turn back on and indicate the battery life level. Then turn off the winder again 2 Note: After the ON/OFF LED button is released, the LED brightness will gradually fade to dark, indicating to the user that the winder is turning off. 1.
GENERAL SPECIFICATIONS The watch winder is pre-configured. To select another configuration that matches your watch model, we invite you to download the Kross Watch Winder app on the App Store or Google Play Store. Please check your app regularly for upgrades and new features. Once in the app, just select the caliber that matches your watch model. The application allows the configuration of the winding system using the iPhone or Android Bluetooth low energy (Bluetooth Low Energy or BLE) technology.
REPLACING THE BATTERIES 5 When turning on your watch winder, if the LED button flashes once every 2 seconds, it means that you have to change the batteries. To replace the batteries, proceed as follows: X4 1. Remove the watch support (1) by unclipping it in line with the winding case. 2. Using the Kross Studio key supplied with your watch winder (6), remove the central screw (3) by turning the key anticlockwise. 3. Once unscrewed, winding case (4). 4. Insert 4 Lithium/Alkaline AA 1.
WARRANTY Your rotating winding case is guaranteed for two years from the date of purchase. Register your product online on kross-studio.com to be granted a 3-year warranty extension. (total 5 years) The warranty covers the free replacement or repair of your winder resulting from manufacturing defects, provided that these defects are clearly established as such. It does not cover cleaning work, normal wear and tear of the device as well as damage due to external causes or improper use.
