Users Manual

Digicom mobile Service Centre.
After fully charging, disconnect the device from the charger. First unplug the
charger from the device, and then unplug it from the electric socket.
To save energy, unplug the charger when not in use. The charger does not
have a power switch, so you must unplug the charger from the electric socket
when not in use to avoid wasting power. The charger should remain close to
the electric socket and easily accessible while charging.
Installing a SIM-card
Insert the SIM or USIM card provided by the mobile telephone service
provider.
1. Open the cover of the SIM-card.
2. Insert SIM-card with contacts facing down as shown in the picture.
3. Push on the SIM-card into the slot to fix it.Attention!Do notinsert
thememorycard in slotfor the SIM
card. If the
memory card stuck in the slot for SIM-card, take the device to service center
Sigma mobile for its safe removal. Be careful not to lose the SIM-card and do
not let others use it. Digicom mobile is not liable for any damages or
inconvenience caused by lost or stolen cards.
4. Close cover of the SIM-card.
Installing a memory card
Your device accepts memory cards with maximum capacities of 32 GB.
Depending on the memory card manufacturer and type, some memory cards
may not be compatible with your device.
? Some memory cards may not be fully compatible with the device. Using an
incompatible card may damage the device or the memory card, or corrupt
the data stored in it.
? Use caution to insert the memory card right-side up.
? The device supports the FAT and the exFAT file systems for memory cards.
When inserting a card formatted in a different file system, the device asks
to reformat the memory card.
? Frequent writing and erasing of data shortens the lifespan of memory cards.
? When inserting a memory card into the device, the memory card’s file
directory appears in the My Files.
1. Open the cover of the memory card.
2. Insert memory card with contacts facing down as shown in the picture.
3. Push on the memory card into the slot to fix it.
4. Close cover of the memory card.
Touchscreen usage
It is recommended to use fingers when you use the touchscreen.
Attention! Do not allow the touchscreen to come into contact with other electrical
devices.
Electrostatic discharges can cause the touchscreen to malfunction. To avoid
damaging the
touchscreen, do not tap it with anything sharp or apply excessive pressure to it with
your fingertips.