Datasheet

LSA-PLUS
®
Series 2 & avaNTi Modules and Accessories
TECHNICAL DATA
Module Specifications
Contact Resistance ≤2.5 mΩ
Insulation Resistance >50000 MΩ
Plastic PBTP UL94 Rated VO
Contact Material Brass Alloy
Contact Re-Terminations 0.4mm (26 AWG) 1 conductor per contact ≥ 200 re-terminations
0.5mm (24 AWG) 1 conductor per contact ≥200 re-terminations
0.63mm(22 AWG) 1 conductor per contact ≥200 re-terminations
Conductor Diameter Range 0.4 to 0.63mm
Insulation Diameter Range 0.7 to 1.5mm
Operational Temperature -20 to +80ºC
Mounting Pitch 17.5mm
Contact Stability satisfying IEC 352 Part 4
Electrical safety satisfying EN 60950, Conforms to CE low-voltage guidelines
EXCHANGE SIDE
Product Width Height Depth
LSA-PLUS
®
avaNTi module 130.0 17.5 40.0
100 pair MDF tag block 130.0 180.0 70.0
100 pair MDF tag block with protection 130.0 180.0 105.0
64 pair MDF tag block 130.0 145.0 70.0
128 pair MDF tag block 130.0 285.0 70.0
Product Dimensions (in mm)
Single Pair Protection Plug for avaNTi MDF (1600 pairs Per vertical)
Max. Operating voltage (a/b-e, a-b) V
max,e 180 V
Nominal DC spark-over voltage V
sdcn 180-300 V
Impulse spark-over voltage @1 kV/µs (a/b-e) <900 V
Impulse life time (300 times 10/1000µs, alternating polarity) 100 A
Nominal arrester surge current (8/20 µs; a/b-e) 5 kA
Nominal arrester alt. discharge current (50hz,1s; a/b-e) 5 A
rms
Fail safe response time @ 5 Arms <5 Secs
Max. Operating current (a-a’/b-b’) @ 25°C 120 mA
Rated line resistance (a-a’/b-b’) @ 145mA, 25°C 6-25 Ω
Resistance balance <0.5 Ω
Max. Switching Current of PTC @ Vmax=230V
rms 3 Arms
Max. Switching Time of PTC @ 1Arms 2.5 Secs
Capacitance (1MHz/1V
rms; a/b-e, a-b) <1.50 pF
Insulation resistance @ 100V(a-b, a-e, b-e) >1000
Operating temperature -20°…+60°C
Storage temperature -40°…+80°C
Electrical characteristics ITU-T K.12
compliant
Mechanical characteristics Sinusoidal wave acc. To IEC 68-2-6
Climatic characteristics DIN IEC 68 part 2-2/3 (thermal resistance)
DIN IEC 68 part 2-1(cold resistance)
Circuit Diagram
Component Dimensions