SDS
KANO LABORATORIES LLC
SAFETY DATA SHEET
SECTION 4: FIRST AID MEASURES
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Product Name: Pyrolube Grease
Product Use: Lubricating Grease
Manufacturer: Kano Laboratories LLC
1000 E. Thompson Lane
Nashville, TN 37222
Information Phone Number: (615) 833-4101
Fax: (615) 833-5790
Website: www.kroil.com
SDS Date of Preparation: July 19, 2021
GHS / HAZCOM 2012 Classification:
Not classified as hazardous according to 29 CFR 1910.1200 (2012)
Label Elements:
None required.
Chemical Name
CAS#
%
Petroleum Paraffinic Base Oil
64742-70-7
100
Natural Graphite
7782-42-5
1-5
Crystalline Silica, Quartz*
14808-60-7
0.1-0.5
*Carcinogen classification applies to respirable forms only. Not applicable to this product.
Eye: Rinse thoroughly with water for several minutes, holding the eye lids open to be sure the material is washed
out. Get medical attention if irritation develops or persists.
Skin: Remove contaminated clothing. Wash contact area thoroughly with soap and water. Get medical attention if
irritation persists. Launder clothing before re-use.
Inhalation: Remove person to fresh air. If breathing is difficult or irritation develops, get medical attention.
Ingestion: Rinse mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never
give anything by mouth to an unconscious or drowsy person. Get medical attention.
Most important symptoms and effects, acute and delayed: May cause mild eye irritation. Prolonged skin contact
may cause drying of the skin. Inhalation of mist may cause upper respiratory tract irritation. Ingestion may cause
gastrointestinal irritation, nausea, vomiting or diarrhea.
Indication of immediate medical attention and special treatment, if needed: No immediate medical attention is
required.
Suitable (and Unsuitable) Extinguishing Media: Use water fog, carbon dioxide, dry chemical or foam.
Specific Hazards Arising from the Chemical: Product is not flammable but will burn under fire conditions.
SECTION 5: FIRE FIGHTING MEASURES
SECTION 2: HAZARDS IDENTIFICATION
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION