Owner manual

Installation and operating instructions BM 100 A 11
1.3.3 Installation instructions: Gauge - all applications
BM100 A gauges are designed to be mounted on a suitable process connection on a tank or sump.
Install the gauge using two people to avoid damaging the probe. Support the housing and the probe.
Gauge installation: Cable probe types: B, H, K & L
Caution :
1
Do not over-bend probe!
Inserting the probe:
2
hold more than one metre above the opening to avoid cable bending.
Outdoor sites
Fit a sunshade on the gauge for open-air installations: this is supplied on demand. The ambient
temperature limits are given below.