ROKIT G2 POWERED SERIES NEAR FIELD STUDIO MONITORS USER GUIDE
IMPORTANT SAFETY INSTRUCTIONS CAUTION ATTENTION: RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
Contents Introduction - Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4 KRK Systems Design Philosophies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6 System Controls - Connecting Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8 Installing and Positioning Your Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 12 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Congratulations! Welcome to the all new Generation 2 (“G2”) RoKit Powered Studio Monitor Series from KRK Systems. For years, the RoKit series has been a popular choice for accurate monitoring in studios large and small. Now, the Generation 2 RoKit provides a new standard for even better performance and accuracy, raising the bar once again. True, this is a lofty claim for this next generation KRK series, considering KRK has always been the standard, but, it's a fact.
Unpacking Your RoKit G2 Powered monitor has been carefully inspected and tested before packing and shipping. After unpacking your monitor, carefully inspect it for exterior damage and immediately report any physical damage during transit to your shipping carrier. Save the shipping boxes and all packaging materials in case the unit needs to be returned to your local dealer or KRK Systems, LLC.
KRK Systems Design Philosophies KRK Systems is the most dedicated monitor company in the world and we are thrilled you have joined our ever growing family of loyal customers. The following information helps explain why we are the most successful monitor company in the world. Our Focus is Your Mix At KRK, our focus has always been to make the most accurate studio monitors available at any price. We don’t offer PA gear, mixers or motorcycles – just the tools you need to deliver a great mix.
Even More Accurate than Before We took a great monitor series and made it better. Our engineers and listening panel took the Generation 2 RoKit’s speaker voicing to even more accurate levels. What you hear is what you are intended to hear, coloration is not part of the spec. This performance is brought to you by drivers that are custom-designed by our world-class studio monitor engineering team, for clear, low-distortion performance.
System Controls AMPK00053 AMPK00047 AMPK00050 System Volume The input sensitivity is adjusted with the rear panel mounted System Gain control (counterclockwise reduces sensitivity). Adjustment range is from -30dB to +6dB. Factory preset gain is +6dB, which should suffice for most conditions. Normally, adjustments would only be made if you were using your monitor in a surround system and needed to balance levels or if your monitor send is too hot and not adjustable.
Connecting Your System IMPORTANT: All connections should be made, all fader and controls should be set at their minimum levels, and all other equipment should be powered prior to powering up your RoKit G2 monitors. NOTE: Ensure that the voltage indicator found in the voltage selector is set to the correct voltage setting for your local supply. Powering On The power On/Off switch is located on the rear panel. The KRK logo on the front face plate illuminates when power is applied.
Installing Your Monitors The close-field monitor, by definition, reduces room interaction. This can be compared to the conventional stereo configuration or the large monitor arrangement in a recording studio where sounds emanating from the monitor or reflecting off ceilings, walls, and floors greatly affect the sound quality. By shortening the path to the ear, the close-field monitor offers a tremendous amount of flexibility, allowing the sound to become less susceptible to differing room conditions.
Positioning Your Monitors Positioning your monitors correctly in the studio is critical to their performance. Typically, they should be placed so that the listening position is fully “covered” with all monitors resting on the same horizontal plane. A great way to test a monitor for its imaging capability is to play back a CD or DVD recorded acoustically in stereo (or one recorded in surround sound if you have a surround sound set up). We recommend acoustic music because it represents the spectrum of sound.
Mid-Field Configuration – This configuration is similar to the Close-Field configuration. It is normally used with larger monitors or when the monitors are too large or heavy to be placed on the work surface. This set up has the potential for a larger sweet spot and better spatial imaging. Make sure that the monitor is high enough so that the woofer is not obscured by your mixing surface or studio furniture (refer to Figure 2).
5.1 Channel Surround Sound Configuration Begin by placing the Left and Right front channels 30° from the Center channel and equidistant to the listening position. The Left Surround (rear) and Right Surround (rear) channels should be placed 110° from the Center channel. Their location should also be equidistant from the listening position. The subwoofer is most effective when situated directly below the Center channel.
Troubleshooting If you’re having trouble, check out these tips... If there is no power, check to see if... • The power cord is plugged into both the IEC socket on the rear panel of the monitor and into the AC mains. The KRK logo on the front face plate will illuminate when the monitor is powered on. • The AC mains voltage is matched to the operating voltage requirements (see Changing Voltage in the Connecting Your System section on page 6).
The sound quality changes... • Repeat the steps in the Troubleshooting section above before continuing to the next steps. • Disconnect the signal cable at the input of the monitor. With power on, place your ear close to each driver (tweeter/woofer) and listen for noise (i.e. a slight hiss or hum). If there’s absolutely no sound whatsoever, it could be that one or more of the drivers (woofer, tweeter or both) is at fault. It’s also possible that the problem lies somewhere in the electronics.
Shipping Instructions • For the safest possible return to KRK, please use the shipping carton and pack aging in which your RoKit G2 Powered was originally shipped. • KRK cannot be responsible for any damages incurred during the shipping process due to poor packing. Make sure to insure your shipment. • If your monitor is out of warranty and you would like a quotation prior to servicing your product, please call for a RMA number. No service will be performed on your unit without this number.
• If your monitor is out of warranty and you would like a quotation prior to servicing your product, please call for a RMA number. No service will be performed on your unit without this number. • For replacement part quotes, please call 954-316-1580. Specifications Frequency Response RP8G2 44Hz to 20kHz +/- 1.5dB High Frequency Driver 1” Soft Dome Low Frequency Driver 8” Aramid Glass Fiber Cabinet Dimensions (HxWxD) 15.6” x 10.9” x 11.8” 39.4 cm x 27.5 cm x 29.9 cm Net Weight (each) 25.8 lbs.
Notes
Notes
w w w . k r k s y s . c o m Our mission is to innovate, design and deliver superior audio products that form the bridge between an artistic vision and a realized dream.
