Owner’s Manual Epix - Front Baffle
Congratulations on choosing Krix installation 1. Remove all screws on MDF protective cover panel on back box using Phillips head screw driver. Now gently remove MDF protective cover. 2. Clear away any excess plasterboard flushing compound if necessary 3. Orientate front baffle to align terminal panel will terminal cover on front baffle (see diagram) 3. 4. Connect 3 X block connectors on front baffle to corresponding connectors on back box (see diagram) 3. 5.
installation 7. Attach grille if required.
Krix Loudspeakers Pty Ltd 14 Chapman Road Hackham SA 5163 Australia T 61 8 8384 3433 F 61 8 8384 3419 listen@krix.com krix.
