User Guide

10 English MAX 132/s
1 ON/OFF switch
2 Rotational direction switch
3 Mechanical two-speed selector
4 Torque adjustment ring
5 Battery locking
6 Battery
7 Battery charging unit
Accessories illustrated or described are not always
included as standard delivery items.
Measured values determined according to
EN 50 260.
Sound pressure level: 63 + 3 dB (A)
Sound power level: 76 + 3 dB (A)
Work place emission value: 66 + 3 dB (A).
For operation, noise protection measures are
required.
The acceleration measured is usually less
than 2.5 m/s
2
.
The rated voltage of the battery must agree with the
value on the machine.
– The batteries are not charged. They therefore have
to be charged before use.
– A new battery develops full power only after it has
been subjected to approx. 5 charging and dis-
charging cycles.
– The maximum service life of the batteries is
attained if you charge these at an ambient temper-
ature of between +5 °C and max. +45 °C.
– If the battery is not within the permitted loading
temperature range (approx. +5 °C and +45 °C)
charging time is extended by the cooling or warm-
up time.
– Important! Batteries will discharge even if the tool is
not used. They should therefore be re-charged reg-
ularly.
Or better still – connect the battery to the mains
charger which will automatically switch to mainte-
nance charging after the battery has been fully
charged. This is particularly useful for maintenance
and for the optimal operational readiness of the
batteries.
– Do not leave the battery in the charger if the latter
is not in operating condition.
3 Illustration
4 Technical Data
Electronic battery-driven rotary
screwdriver
MAX 132/s
Article number 12 04 2401
Right/Left rotation •
No-load speed
1st Gear 0–450 min
–1
2nd Gear 0–1500 min
–1
Screwing into wood up to max. 6 mm
Drilling into steel up to 10 mm
Drilling into wood up to 16 mm
Spindle thread 3/8" UNF
Drill chuck span 1–10 mm
Mechanical torque selection in 7 stages
to approx. 7 Nm
Max. torque 18 Nm
Weight with battery approx. 1.75 kg
Rechargeable Battery A132
Article number
(Spare parts no. 46416)
98 02 4701
Type NiCd
Rated voltage 13.2 V
Capacity 1.5 Ah
Number of cells 11
Operating temperature range +5 °C ... +45 °C
Weight 0.8 kg
Battery charging unit MSL 60
Article number
(Spare parts no. 30858)
98 03 3401
Input voltage 230 V ~
Output voltage 13.2 V
Charging current/time approx. 1.65 A /
approx. 60 min
Weight approx. 1.3 kg
5 Noise/vibration information
6 Charging the batteries
MAX 132/s - Buch Seite 10 Montag, 3. April 2000 9:05 09