User Manual

8 Krell Evolution 707
Calibration Screen
The CALIBRATION SCREEN appears. After a short period of time, the calibration process
begins.
While the Evolution 707 is in
the calibration mode, you
hear white noise unless mute
(38) is active. When the white
noise stops, the calibration
process has ended. Other
functions of the component
are inactive until calibration is
complete.
Select
RUN ALL. This selection enables the Evolution 707 to obtain basic information about
the loudspeakers connected to your system.
RUN ALL
The RUN ALL function finds and sets all subwoofers connected to your system to ALL. You
need to re-set each subwoofer for its required purpose.
AUTO ROOM EQ
Once AUTO ROOM EQ is set, the parameters cannot be altered or trimmed. Device EQ is a
separate function, found in the CONFIGURE DEVICES section of the menu.
Press the previous button or key to return to the
LISTENING ROOM SETUP screen. Select
MANUAL SETUP from the LISTENING ROOM SETUP screen. The SPEAKER MAIN MENU screen
appears.
Select
CALIBRATE SPEAKERS from the MANUAL SETUP MENU screen. The SPEAKER SETUP
scr
een appears.
Speaker Main Menu
Automatic Setup Screen