Inc. Integrated Transport & Processor Owner's Reference

REMOTE CONTROL

REMOTE CONTROL OPERATION

The KPS-30i comes equipped with a remote contrgl from which processor

and basic transport functions can be controlled. A brief description of the

buttons and their functions is provided. An optional remote control is available

that includes additional functions for KRELL preamplifiers and power

amplifiers.

BATTERY INSTALLATION AND REMOVAL

NOTE: Batteries should be replaced when functions from the remote control

become intermittent. The KPS-30i remote uses two AAA size 1.5 volt batteries.

1. Remove the back plate to expose the batteries.

2. Remove the old batteries.

3. To insure optimal conductivity, clean the metal contacts.

4. Install new batteries, following the battery position diagram on the plastic

battery receptacle.

5. Re-install the back plate.

6. Check to make sure the remote control is functioning properly.

If you have questions about the remote control operation contact the KRELL

staff for assistance.