Inc. Integrated Transport & Processor Owner's Reference

KPS-30i PROGRAMMING

PROGRAM: (front panel only) Track programming gives you the ability to select

which tracks you would like to hear and the order in which you would like to

hear them. This method of programming is short term and will be cleared when

you press the Stop button twice or the Clear button. Once’a program is written,

basic functions like Pause, Repeat, Track forward, and Track Back work within

the program. A maximum of thirty tracks can be stored in a program sequence.

NOTE: FULL appears in the display if the thirty track maximum is exceeded.

NOT POSSIBLE appears in the display if a non-existent track is selected.

USE 0-9 appears in the display if the [<< or >>I buttons are pressed while

programming.

HOW TO WRITE A PROGRAM

1. Press Program on the front of the KPS-30i. PROGRAM will begin flashing in

the display window.

2. Key in the desired track sequence. Tracks consisting of two digits must be

keyed within two seconds of each other. The number of tracks and total

playing time of the programmed sequence will appear in the display window.

Track numbers will appear in the display as they are stored within a

programmed sequence.

3. Press Program to exit Program mode.

4. Press Play to. begin playback of the programmed sequence.

Press the Stop button twice or the Clear button to erase a programmed

sequence.

NOTE: While playing a programmed sequence, the Track Forward, Track Back,

Repeat and Pause functions work within the program.