Inc. Evolution 202 Stereo Amplifier Owner's Reference
Table Of Contents
- Front Cover
- Safety Instructions
- Contents
- List of Illustrations
- A Letter from Dan D'Agostino
- Section One: Features and Technology
- Section Two: Unpacking and Placement
- Section Three: Quick Start
- Section Four: Anatomy of the Evolution 202
- Section Five: Connecting the Evolution 202
- Section Six: Operation
- Section Seven: Customizing
- Section Eight: Troubleshooting
- Warranty
- Return Authorization
- Specifications
- Back Cover
14
Operating the Evolution 202
After the Evolution 202 is connected to your system and to AC power, and the
front panel display has stopped scrolling, begin operation:
1. Press the power button (1) on the front panel, or the remote control power key.
The standby/power LED turns blue. The display shows the factory default
input:
S-1, and level: -INF. The Evolution 202 is now in the operational mode.
2. With the preamplifier output muted, or the volume fully attenuated, select a
source manually using the front panel input select buttons (8, 9, or 10) or the
remote input select keys. Start playing the source. Use the level control knob
(14) or the remote level keys to set the volume to a comfortable level.
3. To return the preamplifier to the stand-by mode, press the power button (1) or
remote power key.
Krell recommends leaving the Evolution 202 in the stand-by mode when it is
not playing music.
(SECTION THREE: Quick Start)