KPS 28c "rile I.
KPS 28c Krell Playback System with Krell CAST Technology v 00.0 Krell Industries,Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAILkrell @krellonline.com WEBSITEhttp:l/www.krellonline.com This product complies with the EMC directive (89/336/EEC)and the low-voltage directive (73/23/EEC). WARNINGS The KPS28c must be placed on a firm, level surface whereit is not exposedto dripping or splashing.
Contents Page INTRODUCTION 1 DEFINITION OF TERMS 1 REVOLUTIONARYKRELL CAST TECHNOLOGY 2 UNPACKING 3 PLACEMENT 3 AC Power Guidelines QUICK START Input and Output Connections Power On To Play a CompactDisc 3 4 4 4 4 FRONT PANEL DESCRIPTION 6 BACK PANEL DESCRIPTION 8 REMOTE CONTROL DESCRIPTION Battery Installation and Removal CONNECTINGTHE KPS 28c TO YOUR SYSTEM Analog Output Connections Digital Output Connections Connecting the KPS28c Power On OPERATINGYOURKPS 28c To Play a CompactDisc Howto
Illustrations iv Page FIGURE1 The KPS28c Front Panel 5 FIGURE2 The KPS,28c Back Panel 7 FIGURE3 The KPS28c Remote Control 9 Krell Playback System 28c
Introduction Definition of Terms Thankyou for your purchaseof the Krell Playback System28c. The KPS28c’s transport design eliminates error-producing wobbleand delivers exceptional tracking and focus accuracy,regardless of environment or disc characteristics. Digital circuitry providesultra-high signal resolution and direct coupledanalogcircuitry assuressuperior low-frequencyperformance,with low distortion, wide bandwidth, and minimal negative feedbacks.
Revolutionary Krell CAST Technology Current Audio Signal Transmission, .termed CAST,is a revolutionary methodof connecting analog audio components for unparalleled sonic performance. Innovative engineering combines the new Krell CASTcircuitry with existing Krell Current Modetechnology to create entire CASTsystems that reproduce music with incredible range,tonality, andprecision.
Unpacking Placement 1. Openthe shipping box and removethe top layer of foam. Yousee these items: Before you install the KPS28c into your system, review the following guidelines to choose the location for your component. This will facilitate a clean, trouble-free installation. TheKPS 28c doesnot require a special rack or cabinet for installation. For the dimensionsof the KPS 28c, see Specifications, on the back cover. 1 KPS 28c 1 AC power cord 1 12 VDC(12 Volt trigger) remotecable link 1 1.
Quick Start The abbreviated proceduresin this Quick Start section enable you to connect and operate your KPS28c systemquickly to enjoy its basic features. Toaccessthe full array of available features for the KPS28c, please read the entire owner’s reference manual. Numbersin parentheses refer to Figure 1 on page5, Figure 2 on page 7, and Figure 3 on page 9. INPUT AND OUTPUTCONNECTIONS IMPORTANT Makesure all componentsand power sources are off before connecting inputs and outputs.
FIGURE 1 THE KPS 28c FRONT PANEL 9 2 8 10 KPS 28c POWER 6 CompactDisc TransportFunctions 1 Compact Disc Transport 2 Open/Close Button Power 3 Stand-byLED 4 PowerButton 5 PowerLED Compact Disc Functions ® LED 6 HDCD 7 Compact Disc Display 8 TrackForwardButton 9 TrackBackButton 10 PauseButton and LED 11 Stop Button 12 Play Button 7 11 12
Front PanelDescription See Figure I on page5 The front panel of the KPS28c accessespower on and off and compact disc functions. The compactdisc display showscompactdisc playback and programmingstatus, Front panel features andtheir descriptionsfollow. CompactDisc Transport Functions 1 CompactDisc Transport The compactdisc transport holds the compact disc. 2 Open/Close Button Use this button to open and close the compact disc transport.
FIGURE 2 THE KPS 28c BACK PANEL 14 20 KPS 28c Krell Playback LEFT IN System IN ? KRELLINDUSTRIES. INC.
BackPanel Description See Figure 2 on page7 The back panel of the KPS28c provides Connections for analog and digital outputs, power, and remotecontrol inputs. Back panel features andtheir descriptionsfollow. Analog Outputs 13 Left and Right CASTOutputs TheKPS28c is equippedwith one pair of analog outputs with 4-pin connectors,for usewith Krell CAST-equipped preamplifiers. 14 Left and Right BalancedOutputs The KPS28c is equippedwith one pair of balancedanalog outputs with XLRconnectors.
FIGURE 3 THE KPS 28c REMOTECONTROL f-- OISPI-&Y~ 22 25 (~ 23 (~ (~OPEN MODE 24 32 33 26 +10 CL.
RemoteControl Description See Figure 3 on page9 BA’n’ERY INSTALLATION AND REMOVAL The KPS28c remote control uses two AAA-size 1.5 Volt batteries. Batteries are included with the shipment.To install the batteries: 1. Removethe backplate, using the supplied T-10 Torx wrench. 2. Install the batteries, following the battery position diagramon the plastic battery receptacle. 3. Replaceand secure the backplate.
RemoteControl, continued See Figure 3 on page9 29 Play Key Use this key to start playbackfrom the beginning of the compactdisc, to resumeplayback after pause, or to start playback of a programmedsequence. 30 Track Forward and Back Keys Usethese keys to select and begin playing the track that follows or precedesthe current track. 31 Search Forward and Back Keys Press and hold these keys to scroll forward or backwardthrough the current track.
Connecting the KPS28c to YourSystem See Figure 2 on page 7 INPUT AND OUTPUT CONNECTIONS Analog Output Connections TheKPS28c is equippedwith three analog output connections: CAST,balanced, and singleended. Krell recommends using its proprietary Krell CASTsystemfor unparalleled sonic performancebetweenthe KPS28c and other Krell CAST-equippedcomponents.
ConnectingYour KPS28c, continued Operating Your KPS28c See Figure 2 on page7 Note Youcan set up your KPS28c to play a musical selection in three different areas.Connect the CASToutput to a CAST-enabledsystem in one listening area, the balancedoutput to a systemin a secondlistening area, and the single-ended output to a systemin a third listening area. Themusicalselection will play simultaneouslyin all three areas. 4.
Operatingthe KPS28c, continued Keyin the desired track sequenceusing the HOWTO CREATEAN A/B LOOP direct track accesskeypad(26). Theselect1.
Warranty ThisKrell producthasa limited warrantyof five yearsfor parts andlabor on circuitry andthreeyearsfor parts and labor onall mechanical components. Should this productfail to perform at anytimeduringthewarranty, Krell will repairit at nocostto theowner, exceptas set forth in this warranty. Thewarrantydoesnot apply to damage causedby acts of Godor nature.
ReturnAuthorization Procedure To return a product to Krell, please follow this procedure so that we may serve you better, If you believe there is a problemwith your com- 1. Obtain a Return Authorization Number(R/A number) and shipping address from the ponent,please contact your dealer, distributor, Krell Service Department. or the Krell factory to discuss the problem before you return the componentfor repair. To 2.
Krell Industries,Inc. 45 Connair Road Orange, CT 06477-3650USA KPS 28c Krell PlaybackSystem with Krell CASTTechnology TEL 203-799-9954, FAX203-891-2028 E-MAIL krell@ krellonline.com WEBSITE http://www.krellonline.com Specifications FREQUENCYRESPONSE 20 Hz-20kHz +0.0, -0.
