assembly Instructions

71
4.6 Installation options
The 4 feet of the outrig-gers must be
placed on rm ground. If necessary,
use sturdy base inserts.
NOTE:
The outriggers feature telescopic base
plates that can be adjusted from 75 to
25 mm and secured with a gravity pin.
Installation option with outriggers
Mount the outriggers as shown in the
picture to the left. The securing cou-
plings with shells of the outriggers are
designed to prevent torsion and twis-
ting and must be firmly tight-ened with
a size 22 spanner.
The outriggers must be aligned at an
angle of approx. 30° to the stabiliser.