assembly Instructions

61
4.5 Installation of ProTec folding scaffold
Step 1
Place the two stabilisers and the two
base brace on the ground, remove the
mushroom head square neck screws
and mount the base braces to the up-
right extensions of the stabilisers. The
base braces must be at a distance of
approx. 70 cm. The mounted base bra-
ces link the stabilisers, ensuring proper
upright position of the scaffold.
Step 2
Remove the wing screw at the castor
and place the foot plate over the castor
spindle. Tighten the wing screw by a
few turns.
Example: working height 5.80m
The parts must be installed at the
indicated installation sites only.
Variations to the standard assembly
require prior consultation with the
manufacturer.