INSTALLATION GUIDE Nola™ Single Lever Flex Commercial Style Kitchen Faucet KPF-1640 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
/8” (10mm) 3 3/4” (96mm) Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts 7/8” (22mm) 19.7 list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement º • ∅ 1 15/16” (∅ 50mm) Turn off the hot and cold water supply at the angle stops and turn on the 10 1/8” 8 5/16” old faucet to release any built up pressure. Remove existing faucet.
Diagram and Parts List D A B E F C1 G C2 C3 3 H A. Spray Head D. Hot & Cold Waterlines B. Faucet Body E. Aerator Key C. Mounting Hardware F. Faucet Extender (used for top C1. Rubber & Metal Washer mount sinks only) C2. Mounting Nut G. 2.5 mm Hex Wrench C3. Mounting Screw H.
Faucet Dimensions 19 9/16” 19.56” (497mm) 4.92” (125mm) 360º 88.66” 11/16” (220mm) 6.
Step 1: Remove mounting hardware Remove mounting hardware (C) from mounting pipe B C C Step 2: Install faucet and mounting hardware Insert faucet body (B) into hole in countertop or sink.
Step 3: Secure mounting hardware Adjust the direction of faucet body (B). Tighten mounting nut (C2) until D D snug. Tighten mounting screws (C3) to nut with a Phillips screwdriver until snug B C2 C3 B Step 4: Connect waterlines D C D Connect waterlines (D) C to copper lines and angle stops. Tighten both ends of waterlines with an adjustable wrench until snug.
Step 5: Flush spray hose C Remove spray head (A) from hose. Hold tip of hose.
Step 6: Check for leaks Check for leaks at the connections 8
Replacement Parts 1. A. Spray Head B. Check Valve 2. Washer 3 17 3. Spray Hose & Spring 18 4. Pivot Ring 5. Check Valve Connector 2 1B 6. Set Screw 4 7. Cover Button 1A 5 19 8. Set Screw 6 9. Metal Handle 7 10. Cartridge Cover 8 11. Locking Nut 12. Cartridge 9 12 13 14 15 16 11 10 13. Rubber & Metal Washer 14. Mounting Nut 15. Mounting Screws 16. Faucet Extender 17. Aerator Key 20 18. 2.5 mm Hex Wrench 19. Hot & Cold Waterlines 20.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leaking from faucet handle Locking nut (11) may have come loose or cartridge (12) may need to be reseated Remove cover button (7). Loosen set screw (8) with 2.5 mm hex wrench (18). Remove handle (9). Unscrew cartridge cover (10) by hand.
Maintenance - Cartridge Replacement Step 1: Remove button located at the top of the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge Step 3: Place the new cartridge in the handle seat.
Codes / Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
