R INSTALLATION MANUAL Kore Workstation Stainless Steel Dual Mount Kitchen Sinks KWT321-25/18, KWT302-33/18, KWT320-33/18 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: Félicitations pour l’achat de votre nouvel accessoire de plomberie Kraus! Veuillez conserver la boîte et le matériau d’emballage jusqu'à ce que votre produit soit complètement installé.
Prior to Installation / Avant l’installation / Antes de Installacion : · Make sure that you have all necessary parts by checking the parts list.
Tools you will need / Outils requis / Herramientas que necesitará: Safety Goggles Lunettes de sécurité Gafas protectoras Drill Perceuse Phillips Screwdriver Tournevis cruciforme Taladro Silicone Adhesive Adhésif de silicone Adhesivo de silicona Jig Saw Scie sauteuse Sierra caladora Destornillador de estrella (Phillips) Putty Knife Couteau à mastic Espátula Tape Measure Ruban à mesurer Cinta métrica Pencil Crayon Lápiz Scissors Ciseaux Tijeras Screwdriver Tournevis Destornillador NOTE: Specializ
Make sure to check off that you have all of the following items / Assurez-vous d’avoir tous les éléments suivants / Asegúrese de verificar que tenga todos los elementos siguientes: KWT321-25/18 · Cut-Out Template / Gabarit de découpe / Plantilla de recorte · Top Mount Hardware / Matériel pour montage en surface / Accesorios de montaje · Undermount Hardware / Matériel pour montage sous plan / Accesorios de montaje · · · · · bajo encimera Sink Strainer / Crépine d'évier / Colador fregadero ST-1 Drain Cap / B
Dimensions / Dimensions / Dimensiones: 15 3/8" 15 3/8" R 1/8" (391.7mm) (391.7mm) (3mm) 22" (558.8mm) (101.6mm) 4" 16" (406.4mm) 17" (431.8mm) (89mm) 9" 2" 5" Model # / No de modèle / Modelo #: KWT320-33/18 Sink Dimensions / Dimensions de l'évier / Dimensiones del fregadero: 33” x 22” x 9” Min Cabinet Size / Taille min de l'armoire / Tamaño mínimo del gabinete: 36” (50.8mm) 2" 17" (431.8mm) 16" (406.4mm) (89mm) (215.9mm) 9" (228.
Topmount Installation / Montage en surface / Instalación de montaje superior Step 1.
Step 3.
Step 4. Attach Mounting Hardware / Fixation du matériel de montage / Fije los accesorios de montaje · · Attach mounting hardware to the prongs protruding from the underside of the sink rim. Make sure the hooked side of the mounting clip is facing away from the sink.
Step 5. Apply Silicone or Plumber’s Putty / Application du mastic de silicone ou de plomberie / Aplique masilla de silicona o de plomería · · Clean and dry the surface around the opening of the sink Turn the unit upside down to apply sealant. Apply silicone-based sealant (not included) underneath the edge of the sink · · Nettoyez et séchez la surface autour de l’ouverture de l’évier Retournez l’évier pour appliquer le produit d’étanchéité.
Step 6.
Step 7. Install Plumbing Fixtures / Installation des appareils de plomberie / Instale los accesorios de plomería · · · · · · · · · 12 Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions Run water into sink and check for leaks Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA B125.2 and with CUPC certification. Raccordez le drain à l’évier. Raccordez le siphon au drain.
Undermount Installation / Montage sous plan / Instalación bajo encimera Step 1.
Step 2.
Step 4.
Step 6. Drill hole in countertop / Perçage d’un trou dans le comptoir / Taladre el orificio en la encimera 3/8 · Drill 3/8” diameter x 1/2” deep hole in the countertop · Percez un trou de 3/8 po de diamètre et de 1/2 po de profondeur dans le comptoir · Taladre un orificio de 3/8 “de diámetro x 1/2” de profundidad en la encimera 1/2 Step 7.
Step 8. Secure sink to countertop / Fixation de l’évier au comptoir / Asegure el fregadero a la encimera • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop. Place sink over cutout hole and press firmly • Utilisez un joint de silicone (ou l’adhésif de votre choix) autour du rebord de l’évier. Vérifiez l’alignement de l’évier par rapport à la découpe dans le comptoir.
Step 10. Install plumbing fixtures / Installation des appareils de plomberie / Instale los accesorios de plomería · · · · · · · · · Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions Run water into sink and check for leaks Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA B125.2 and with CUPC certification. Raccordez le drain à l’évier. Raccordez le siphon au drain.
Codes/Standards Applicable / Codes et normes applicables / Códigos/normas aplicables: UP C NSF/ANSI Standard 61 certified by IAPMO C NSF/ANSI Standard 372 certified by IAPMO R Kitchen Sink Warranty / Garantie de l'évier de cuisine / Garantía del fregadero de cocina Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Kitchen Sink" in its original location.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages. This warranty does not cover Marine or Outdoor Installation. This warranty does not cover any free gifts included with purchase.
Salvo que se indique lo contrario, Kraus no ofrece ninguna garantía, expresa o implícita, incluidas las garantías de comerciabilidad y adecuación para un propósito específico, o el cumplimiento de cualquier código. Los gastos de envío estarán cubiertos durante el primer (1) año de la pieza o producto de reemplazo garantizado (pueden aplicarse cargos de envío a HI, AK y Puerto Rico). Los gastos de envío internacional no están incluidos.
If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an Authorized Partner please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
R INSTALLATION MANUAL Bolden Single Handle Pull Down Kitchen Faucet TM KPF-1610 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone. · Flush angle stops to release any debris prior to installation.
Diagram and Parts List A. Spray Head B. Faucet Body C. Mounting Hardware C1. Rubber & Metal Washer C2. Mounting Nut C3. Mounting Screws D. Quick Connector E. Weight E1. Weight Clip E2. Weight F. 2.
Faucet Dimension 10 3/4" 18" (456mm) (274mm) 3 1/2" (88mm) 25° Ø1 7/8" 8 3/4" 2 1/4" (162mm) 90° (56mm) 6 3/8" (221mm) (116mm) 4 1/2" (48mm) Ø2 1/8" (578mm) 22 3/4" 17" (432mm) (54mm) 9/16" - 24UNF Installer Tip: Shut off main water supply before installing new faucet.
Step 1. Remove mounting hardware Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove mounting hardware (C) from faucet body (B). C Step 2. Installing the faucet assembly Optional No Escutcheon Installation. Insert faucet body through the hole in the sink.
Step 3. Securing the faucet assembly Install the rubber washer and metal washer (C1) onto the threaded mounting shank. Thread the nut (C2) onto the mounting shank. Lock the nut (C2) into position by tightening the screws (C3). Do not overtighten. C1 C2 C3 Step 4. Securing the faucet assembly Push the quick connector (D) firmly upward and attach it to the receiving block (1). Pull down moderately to ensure the connection has been made.
Step 5. Securing the faucet assembly Install the weight clip (E1) at the point of the hose marking "weight here". Insert the weight (E2) onto the clip (E1) by sliding it down onto the clip (E1). Weight here E2 E2 E1 Weight here E1 Step 6. Making the waterline connections 1 Thread the nut (1) on the supply line onto the outlet of the water supply valve and tighten with a wrench. Do not overtighten. NOTE: Please make sure filter washers are installed before connecting to the main valve.
Step 7. Flushing and checking for leaks Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet on to the warm position where it mixes hot and cold water. Flush the water lines for one minute. This flushes away any debris that could cause damage to internal parts. Check for leaks. Re-tighten any connections if necessary, but do not overtighten.
Replacement Parts Replacement Parts List 1. Sprayer 6 4 2. Screen Washer 3. Sprayer Hose 5 4. Flow Regulator Assembly (1.8GPM) 7 7.1 5. Quick Connector Assembly 6. Spring Assembly 7.2 8 9 10 3 2 16 1 19 17 20 18 24 11 12 13 14 15 6. Spring Assembly 7. Sprayer Holder Assembly 7.1.
Trouble-Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Bonnet nut (11) has come loose Remove the cover button (15). Loosen set screw (14) with hex wrench (22). Remove the handle. Unscrew cap (12). Tighten bonnet nut (11) with an adjustable wrench.
Codes/Standards Applicable: NSF/ANSI 372 UP C NSF/ANSI 61-9 UP C R C ASME A112.18.1 1.8GPM 6.8L/min maximum C R FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
R INSTALLATION GUIDE Kitchen Strainer ST-1 / ST-2 / ST-3 / BST-1 / BST-2 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.
Diagram and Parts List ST-1 A B C D A. B. C. D. E. F. G. H. Strainer Cover Screw Metal Strainer Foam Gasket Rubber Gasket Main Body Drain Gasket Drain Nut A. B. C. D. E. F. G. H.
Diagram and Parts List BST-1 A B C D E F A. Strainer Cover B. Basket C. Screw D. Metal Strainer E. Foam Gasket F. Rubber Gasket G. Main Body H. Drain Gasket I. Drain Nut G H I BST-2 A B C D E F G H I A. Strainer Cover B. Basket C. Screw D. Metal Strainer E. Foam Gasket F. Rubber Gasket G. Main Body H. Drain Gasket I.
Diagram and Parts List ST-3 A B C D E F G H A. B. C. D. E. F. G. H.
Dimensions Ø4 1/2" Ø4 1/2" (115mm) 3 3/4" 3 3/4" (94mm) (94mm) 1 1/2" 11 1/2" NPSM Ø4 1/2" (115mm) 1 1/2" 11 1/2" NPSM Ø4 3/4" (119mm) Model #: ST-1 Dimensions: Ø4 1/2" x 3 3/4" (114mm) 4 1/2" (114mm) 1 1/2" 11 1/2" NPSM Ø4 3/4" (119mm) Model #: ST-2 Dimensions: Ø4 1/2" x 3 3/4" 4 5/8" (116mm) Model #: BST-1 Dimensions: Ø4 1/2" x 4 1/2" 4 1/2" (114mm) Ø4 1/2" R1/2" (13mm) (114mm) 4 1/2" (114mm) 4 1/2" (114mm) 2 5/8" (65.
Step 1.
Step 2. Insert metal strainer into drain hole with foam gasket attached.
Step 3. Using the screw, tighten the metal strainer and main body into place Screw Step 4.
Replacement Parts ST-1 Replacement Parts List A B C D Finish A. Strainer Cover SS* A. Strainer Cover PGM* B. Screw 1 1/4" SS* B. Screw 1 1/4" PGM* C. Metal Strainer SS* C. Metal Strainer PGM* Part # KPU00010 KPU00010-PGM KPU00003 KPU00003-PGM KPU00011 KPU00011-PGM E D. Foam Gasket KPU00005 F E. Rubber Gasket KPU00006 F. Main Body KPU00012 G. Drain Gasket KPU00008 H.
Replacement Parts ST-2 Replacement Parts List A B C D E F G H Finish Part # A. Strainer Cover KPU00010 B. Screw 1 5/8" KPU00013 C. Metal Strainer KPU00011 D. Foam Gasket KPU00005 E. Rubber Gasket KPU00006 F. Main Body KPU00012 G. Drain Gasket KPU00008 H.
Replacement Parts BST-1 Replacement Parts List Finish Part # A B C D E F G A. Strainer Cover KPU00001 B. Basket KPU00002 C. Screw 1 1/4" KPU00003 D. Metal Strainer KPU00004 E. Foam Gasket KPU00005 F. Rubber Gasket KPU00006 G. Main Body KPU00007 H. Drain Gasket KPU00008 I. KPU00009 Drain Nut H I BST-2 Replacement Parts List A B C D E F G H I Finish Part # A. Strainer Cover KPU00001 B. Basket KPU00002 C. Screw 1 5/8" KPU00013 D. Metal Strainer KPU00004 E.
Replacement Parts ST-3 Replacement Parts List A B C D E F G H Finish Part # A. Strainer Cover KP22191 B. Screw KP22198 C. Metal Strainer KP22192 D. Foam Gasket KP22193 E. Rubber Gasket KP22194 F. Main Body KP22195 G. Drain Gasket KP22196 H.
Accessories Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Accessories” in their original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Accessories) to be free from defects in material and workmanship under normal usage for a period of one (1) years.
If you are a HOMEOWNER, please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-Free : 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL, please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an AUTHORIZED PARTNER, please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
