R INSTALLATION MANUAL Glass Vessel Sinks www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Unpack your new product and ensure that all the parts are contained in the packaging • Keep the product in its original box until you’re ready to install it • The counter top must be flat • Shut off the water supply if replacing a previously-installed vessel sink • Observe all plumbing and building codes in your area • It is recommended that installation of the product be done by a professional plumber For technical assistance or replacement parts, please contact Kraus C
Dimensions Ø16 1/2" Ø14" (419mm) (45mm) 5 1/2" Ø1 3/4" (45mm) Ø1 3/4" Ø1 3/4" (45mm) (45mm) 6" Ø17" (432mm) (152mm) Ø17" Model #: GV-101-19mm, GV-391-19mm, GV-398-19mm, GV-399-19mm, GV-680-19mm Sink Dimensions: Ø17” x 6” Glass Thickness: 19mm 4 Model #: GV-100, GV-101, GV-101FR, GV-104, GV-200, GV-204, GV-580, GV-651, GV-684 Sink Dimensions: Ø16 1/2” x 5 1/2” Glass Thickness: 12mm (432mm) (152mm) 6" Model #: GV-101-14, GV-101FR-14, GV-103-14, GV-104-14 Sink Dimensions: Ø14” x 5 1/2” Gla
Dimensions 16 1/2" (419mm) 6" Model #: GVR-204-RE, GVR-210-RE Sink Dimensions: 21 7/8” x 13 7/8" x 4” Glass Thickness: 15mm Ø1 3/4" (45mm) (152mm) (45mm) (101.
Rough-In Dimensions Finished Wall Ø1 3/4” Drain Hole Top View Countertop 5 1/2” 28” Suggested 34” Suggested 6” 14” - 17” Mounting Ring 1/2” Installer Tip Shut off main water supply before installation.
Above Counter Installation Instructions Before You Begin Prepare counter top by drilling a 1 3/4’’ diameter drain hole at the desired location. Install mounting ring. Place vessel sink on the mounting ring or counter top as shown below. 1. Make sure the vessel sink is not scratched, chipped or broken prior to installation. 2. Check to see if your set contains the following parts: · Vessel sink · Pop up drain (optional, may be sold separately) · Mounting Ring (optional, may be sold separately) 3.
Pop Up Drain & Mounting Ring Installation (Only if Included) Locate and disassemble your pop up drain in the following order: · Unscrew the tail piece · Unscrew the brass nut · Remove the firm washer · Remove the concave washer, leaving the top thin rubber washer on.
1. From above the countertop, insert the drain body into the 1 3/4” drain opening of your sink. 2. From underneath the countertop, insert the concave white rubber washer onto the drain. 3. Pushing the washer all the way up until it is in contact with the countertop. 4. Insert the firm washer onto the drain body until it comes into contact with the concave white rubber washer. 5. Screw the brass nut onto the drain body until it touches the firm washer.
Codes/Standards Applicable UP C C R Glass Bathroom Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Glass Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Glass Sink) to be free from defects in material and workmanship under normal usage for the lifetime of the product.
If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an Authorized Partner please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
