INSTALLATION GUIDE Stainless Steel Farmhouse Kitchen Sink KHF200-30 / KHF200-33 / KHF200-36 KHF203-33 / KHF203-36 KHF204-33 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Inspect the sink prior to installation to make sure the sink has not been damaged during shipping • Use the cut-out template provided by Kraus • Observe all plumbing and building codes according to your state requirement • Additional floor and wall preparation may be required to avoid damaging the product • Make sure to purchase the correct cabinet for your farmhouse sink.
I Tools you will need: Hex wrench Drill Phillips Screwdriver Tape Measure Silicone Sealant Silicone Adhesive Jig Saw B Hex wrench Acetone Adjustable wrench Pencil Screwdriver Tools You Will Need Phillips screwdriver I Phillips screwdriver Silicone Sealant Safety Goggles Step9 J J F Adjustable wrench Level NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite D Parts List • Cut-Out Templ
Dimensions KHF200-33 32 7/8” x 20 3/4” x 10” Min Cabinet Size: 33” Matching Grid: KBG-200-33 Drain Model #: BST-1 16” 9” 16” 527mm 11-5/8” 330mm 295mm 911mm 406mm 35-7/8” 20-3/4” 16” 527mm 406mm 13” 19” 483mm 295mm 835mm 254mm 11-5/8” 295mm 11-5/8” 20-3/4” 527mm 527mm 16” 16” 17-3/8” 32-7/8” 442mm KHF203-33 32 7/8” x 20 3/4” x 10” Min Cabinet Size: 33” Matching Grid: KBG-200-33-1 and KBG-200-33-2 Drain Model #: BST-1 & ST-1 KHF203-36 35 7/8” x 20 3/4” x 10” Min Cabinet Size: 36” M
1.
2. Cut Cabinet Front • Measure height of apron front. Add 1/16” to the dimension when you mark base cabinet front cutout.
3. Install Sink • Place sink in opening.
4. Cut Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
5. Installing Plumbing Fixtures • Connect drain, trap to drain and water supply connections to the faucet according to manufacturer’s instruction.
Codes/Standards Applicable: HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
