VERSION 1.
VERSION 1.1 KTM SERIES KTM-24 | KTM-25 | KTM-32 | KTM-33 Top mount sink installation 1. Verify cabinet clearance. 2. Cut along the top-mount line. 3. Insert the clips into the channels. (bottom view) 4. Drill pilot hole and then cut the countertop opening. 5. Verify fit. Adjust cutout if needed. (must be done by professional) A B SILICONE CAULK 6. (NOT FURNISHED) CHANNEL A B C COUNTERTOP FASTENER Insert the sink. Rotate the clip. 7. Apply silicone sealant.
