Installation Guide

10
NOTE: In compliance with CEC standards, this faucet is designed with a 1.8 gpm
flow rate. At your discretion, you may modify the product with the included 2.2
gpm restrictor. Please note that doing so will remove the capability of this product
to meet specific low-flow standards. Kraus is not liable for any alterations made to
the product post-sale, and highly advises that you consult with your local or
statewide plumbing enforcement agency prior to any modification.
Step 9. Adjusting spout height
Unthread the holding nut (1) and
pull the spout (2) up. Thread the
holding nut (1).
Step 10. Aerator replacement
This faucet ships with a 1.8 GPM
red aerator installed. An optional
2.2 GPM yellow aerator is also
included in the box.
To switch the flow rate of the faucet:
1. Disassemble the aerator assembly
by separating the aerator housing
(1) and the aerator (2).
2. Replace 1.8 GPM red aerator
(2) with the 2.2 GPM yellow aerator (2).
3. Reinstall the aerator assembly.
1
2
1
2
1
2
1
NOTE: The adjustment
can be up to 1". Lock to
the desired location. It is
recommended to set
and forget, so the
grease does not get
worn. It is recommended
to wipe the spout after
setting the height.