R INSTALLATION MANUAL Allyn Transitional Bridge Kitchen Faucet with Pull Down TM KPF-3121 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone. · Flush angle stops to release any debris prior to installation.
Diagram and Parts List 1. 2. 3. 4.
Faucet Installation Procedure 3 1/4" 8 1/8" 9 3/8" (239.07mm) (207.35mm) 7 3/4" (196.75mm) 16" (407.9mm) (83.2mm) Ø1 7/8" (48mm) Ø1 7/8" (48mm) 4" 4" (102mm) (102mm) 14 5/8" (370.4mm) Installer Tip: Shut off main water supply before installing new faucet.
Step 1. Install faucet and secure mounting hardware Secure the faucet body with the rubber and metal washers (2) and the mounting nuts and screws (3). Do not overtighten. 2 3 Step 2. Attach spray hose and weight Connect spray hose to quick connector attached to supply line. Install weight (4) on lowest vertical point on spray hose. White line on the spray hose should be in the center of the weight. 4 NOTE: Please see Step 5 on page 8 to change the flow rate of the faucet.
Step 3. Flush spray hose Remove spray head from spray hose. Hold tip of spray hose. Turn faucet on and let the water run for 60 seconds to flush any debris. NOTE: Please make sure washer is installed attaching spray head to hose.
Replacement Parts 4 7 Replacement Parts List Finish/Color Part # 1. Spray Head SFS, MB, BG* KP44010 2. Check Valve KP44011 3. Washer KP44012 4. Spray Hose 3 SFS, MB, BG* 5. Spout Washers 2 KP44013 KP44014 6. Metal Handle SFS, MB, BG* KP44001 7. Lever Button SFS, MB, BG* KP44002 8. Cartridge Cover SFS, MB, BG* KP44003 5 1 6 8 10 9 11 9. Cartridge Hot KP44004-H 10. Cartridge Cold KP44004-C 11. Base O-Ring KP44005 12. Rubber Washer KP44006 13. Metal Washer KP44007 14.
Trouble-Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or cartridge needs to be reseated. Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench. Water does not shut off Cartridge may need to be adjusted or replaced.
Codes/Standards Applicable: NSF/ANSI 372 UP C NSF/ANSI 61-9 UP C R C ASME A112.18.1 1.8GPM 6.8L/min maximum C R FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
R INSTALLATION GUIDE Allyn Transitional Stand Alone Filtration Faucet TM FF-102 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone. · Flush angle stops to release any debris prior to installation.
Diagram and Parts List A. B. C. D. E. F. G. A Faucet Assembly Flange Rubber Washer Metal Washer Mounting Nut Connector 3/8" Connector 1/4" B C D E G F For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or customerservice@kraususa.
Faucet Dimensions 4 1/2” 3 1/8“ [80mm] 8 3/8“ [214mm] [262mm] 10 3/8“ [115mm] 1 3/4” 2 3/8” [45mm] [61mm] Installer Tip: Shut off main water supply before installing new faucet.
Step 1: Preparing for installation Remove the rubber washer (C), metal washer (D), and mounting nut (E) from the end of the stud. C D E Step 2. Installing the faucet assembly A C D E 6 Place the faucet assembly (A) through the selected hole in the sink or countertop. On the underside of the sink or countertop, slide the rubber washer (C) and metal washer (D) onto the stud. Thread the mounting nut (E) onto the stud, and tighten securely using your wrench.
Step 3. Connecting the quick connect adaptor and water line A Thread the quick connect adaptor (F) onto the end of the faucet assembly (A) stud, and tighten securely using a wrench. Connect the 3/8 in. water line from the filtration system by pushing the line into the connector (F). Pull down on the 3/8 in. line slightly to ensure the quick connect fitting has engaged. Note: A 1/4" connector (G) is included for 1/4" water lines. F 3/8 in.
Replacement Parts Replacement Parts List 2. O-Ring KP44047 3. Cover Button SFS, MB, BG* KP44067 4. Handle SFS, MB, BG* KP44066 5. Cartridge Screw KP44065 6. Cartridge Cover SFS, MB, BG* KP44064 2 8. Flange 5 4 8 3 9 10 11 12 8 KP44046 7. Cartridge 6 13 Part # 1. Locking Ring 1 7 Finish/Color KP44048 SFS, MB, BG* KP44063 9. Rubber Washer KP44052 10. Metal Washer KP44053 11. Mounting Nut KP44054 12. Connector 1/4" KP44057 13.
Trouble-Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Cartridge has come loose Remove index and loosen set screw with hex wrench. Remove the handle. Tighten cartridge with an adjustable wrench. Water does not shut off Cartridge may need to be adjusted or replaced. Remove index and loosen set screw with hex wrench. Remove the handle .
Codes/Standards Applicable: NSF/ANSI 372 UP C NSF/ANSI 61-9 UP C R C ASME A112.18.1 1.0GPM 3.8L/min maximum C R FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
