INSTALLATION GUIDE Oletto™ Single Handle Bar Faucet KPF-2822 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List A B H C D E F G A. Faucet Body B. Aerator C. Flange D. Plastic Washer E. Metal Washer 3 F. Mounting Nut G. Screws H.
Faucet Dimension 8 1/8" [204.9mm] 6 1/2" 2 3/4" [70.0mm] 8" 12" [303.5mm] [90.1mm] [165.1mm] [202.7mm] 3 1/2" Ø2 1/4" [57.
Step 1: Remove washers and mounting nut Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting nut & screws (F&G), metal washer (E) and plastic washer (D) from the faucet (A). A D E F&G Step 2: Installing the faucet A F Place faucet (A) through the hole in countertop. Secure the faucet (A) to the countertop using the plastic washer (D), metal washer (E) and mounting nut (F) provided. Tighten screws (G).
Step 3: Connect waterlines to main valve Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) NOTE are installed before connecting to the main valve. Step 4: Flush faucet After installing faucet, remove aerator (B) with a coin. Turn water on for 30 seconds to remove any debris. Reassemble aerator (B).
Replacement Parts Replacement Parts List Finish / Color 18 1 2 3 4 5 7 13 6 9 10 11 12 14 15 KP27199 2. Washer KP27201 3. Block KP27030 4. O-ring KP27029 5. Screw KP27223 GR, BL* KP27069 8. Bonnet Nut KP27202 9.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps: PROBLEM CAUSE Leakage under the handle Bonnet nut (8) has come loose 10 Hexagon Nut 9 11 12 ACTION Remove the cover button (12). Loosen screw (11) with hex wrench (18). Remove the handle (10). Unscrew cap (9) (by hand only).
Codes/Standards Applicable: NSF/ANSI 372 LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1 1.8GPM 6.8L/min maximum TM Faucet Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
