Installation Instructions

7
Step 2. Install faucet
Step 3. Secure faucet
Insert spray hose (E) into small
hole of base (D). Insert hot &
cold waterlines (G) and supply
hose (F), one by one, in large
hole of base.
Align arrow on faucet body
(B) with arrow on base (D).
Attach faucet body (B) to base
(D). Secure faucet body (B) by
tightening the set screw with
2.5mm hex wrench (J).
F
G
Rubber
Caps
E
F
G
B
D
J
G
Installer Tip: Please remove
rubber caps for spray hose (E)
and supply hose (F) prior to
inserting into base.
Installer Tip: To remove
Quick Connect (I), push
housing upward, hold
firmly, and pull downward.
Installer Tip: Please loosen
set screw from faucet
body (B) prior to securing
to base (D).
E
G
F
G