Installation Instructions
Step 1A. Install base without deck & putty plate
Step 1B. Install base with deck & putty plate
Insert base (D) into sink or
countertop with “FR↑NT”
facing forward. Tighten
screws on base (D) with
4mm hex wrench (J)
until base is secure on sink
or countertop.
Place a bead of clear silicone
sealant (not included) around the
edge of the putty plate (C). Secure
deck & putty plate (C) on sink or
countertop. Insert base (D) into
hole of deck & putty plate (C) with
“FR↑NT” facing forward. Tighten
screws on base (D) with 4mm hex
wrench (J) until base is secure on
deck & putty plate (C).
D
Half Moon Locking Nuts
J
C
D
J
1
2
66
Installer Tip: Rotate the
two half-moon shaped
locking nuts inward before
inserting base (D) into sink or
countertop.
Installer Tip: Rotate the two
half-moon shaped locking
nuts inward before inserting
base (D) into deck plate (C).