INSTALLATION GUIDE Oletto™ Single Lever Pull Out Kitchen Faucet KPF-2610 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
7/8” (22mm) 19.7 º Prior to Installation: • 10 1/8” 8 5/16” (257mm) (21mm) Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775- ∅ 1 15/16” (∅ 50mm) 0703 for a replacement 1 3/8” (35mm) ∅ 1 3/4” • Turn off the hot and cold water supply at the angle stops and turn on the old (∅ 45mm) faucet to release any built up pressure. Remove existing faucet.
Tools You Wil Diagram and Parts List Adjustable w B A Silicone Se J F C I D G H E A. Spray Head G. Hot & Cold Waterlines B. Faucet Body H. Weight C. Deck & Putty Plate I. Quick Connect D. Base J. Hex Wrench Set E. Spray Hose J1. 2mm F. Supply Hose J2. 2.5mm J3.
9º 1/16”~1-1/2” max (1mm~38.
5 1/16”~1-1/2” max (1mm~38.1mm) max 1/16”~1” max (1mm~25.4mm) max (187mm) 9-3/4” (247mm) 10-1/2” (266mm) Ø2" (Ø50mm) 5/16” (8.
1A Step 1A: Install base without deck & putty plate 1B Insert base (D) into sink or countertop with “FR↑NT” facing forward.
1/16” (1mm) min. 1” (25.4 mm) max. Ø 1-3/8” (35 mm) min. Ø 1-1/2” (38 mm) max. Step 2: Install faucet Half Moon Loc 2 1A G D E Rubber Caps G G F G 3 Insert spray hose (E) into small hole of base (D).
Half Moon Lock Half Moon Locking Nuts 2 4 Step 4: Connect waterlines to main valve G GG G G F G E G Rubber Caps G E G Cold F F 3 Thread hot & cold waterlines (G) onto angle stops. Tighten with adjustable wrench until snug.
Half Moon Locking Nuts 4 Step6: Install weight 6 Attach weight (H) on the designated mark on the spray hose (E) G A G G Cold Designated Mark Hot H A E 7 Step 7: Flush faucet E A A 9 Remove spray head (A). Hold tip of spray hose (E). Turn faucet on for 1 minute to flush any debris.
Replacement Part List 1. Metal Assembly 1 Handle 2 2. Cartridge Cover 3 3. Locking Nut 4 4. Cartridge 5. Set Screw 6. Base 8 7. Cover & Putty Plate 8. Spray Head 9. Quick Connect 10. Spray Hose 11. Weight 12. Hex Wrench 2.5mm 10 13. Hex Wrench 2mm 9 5 14.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM 11 CAUSE ACTION Leakage under the handle Locking nut (3) has come loose Unscrew joystick from handle (1). Loosen set screw with a hex wrench (13). Remove metal handle (1). Unscrew cartridge cover (2) by hand only.
Close 25˚ 90˚ Care & Maintenance Push *To keep the product clean & shining, follow the steps below: Open 1. 2. 3. 4. Left Hot Water Rinse with clean water & dry with a soft cloth Do not clean with soaps, acid, polish, abrasives, or harsh cleaners Do not use cloth with a coarse surface Unscrew the aerator and clean when necessary *This installation manual is subject to change without further notice.
Codes / Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
