Installation Instructions

Step 5. Flush faucet

Remove aerator (A). Turn faucet

on for 1 minute to flush any

debris. Reconnect aerator (A).

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly,

take the following corrective steps:

PROBLEM CAUSE ACTION

Water does not shut off

completely

Cartridge (4) may need to be

adjusted or replaced.

Remove index button (1A). Loosen set

screw (1B) with 2.5mm hex wrench (11).

Remove metal handle (1). Remove

cartridge cover (2) by hand only. Remove

locking nut with an adjustable wrench.

Remove ceramic disc cartridge (4). Check

for cracks.

Dripping from aerator

Washer may be missing

or not seated correctly.

Remove aerator (7). Make sure washer is

present and seated correctly.